FAQ what's new
Free shipping for orders over 11,000 yen
Top

A new brand for experienced and skilled golfers.
Fly gently.


KAMUI XP-03 Driver





[High-rigidity channel design with inner bridge and ribs]
A two-depth channel (groove) is designed at the front of the sole.
The circular channel from toe to heel and the deep channel in the center reduce distortion of the face when mis-hits occur in the toe-heel area or on the bottom of the face. The placement of channels from inside the head, bridges that support the weight ports, and ribs that cross the sole significantly increase sole rigidity, firmly absorbing the ball mass and shock of impact and maximizing the initial ball velocity.


[U-shaped DAT55G forged face and laser ultra-fine milling]
Zirconium titanium is subjected to a special strengthening heat treatment to create a material with properties that combine the strength to bounce the ball off with force, the toughness to bend the face, and the elasticity to quickly return the bent face to its original position.
In addition, the 360° full cup face structure with no welds on the face surface achieves a wide high initial velocity area.


[Flat crown/shallow back]
The shallow back, with reduced radius from the toe of the crown to the backsole, naturally results in an address with the right shoulder slightly lowered, making it easy to imagine aiming the ball at the target with a level blow without exerting any force.


[All black IP finish]
When setting up, you can place the head smoothly and take a roughly-positioned stance in a good way, and the face has a bold all-black IP finish.


[Variable hosel system]
Eight different trajectory heights, lofts, launch directions and lie angles can be adjusted. Lofts range from 9° to 12°, and lie angles range from 59.5° to 62°.
You can adjust the shaft depending on how you feel on that day. Also, by having multiple sleeves, you can easily reshaft the shaft.


[XP-03 Graphite Design Shaft] The stiffness at the grip has been adjusted to give it a flex that is not too soft and has no quirks, and the tip is lightweight and has a smooth running feel, making this a long-length shaft with a length of 45.5 inches or more.
At the same time, the torque has been reduced to control the tip's wild movement, minimizing the sluggishness that is common with longer shafts, achieving a high level of both distance and direction.
It has a straightforward flex with no quirks, making it a good match for both swingers and hitters.



spec

Head unit price: 68,000 yen (excluding tax)
Face material and manufacturing method DAT55G Titanium / Precision forged face
Body material and manufacturing method 8-1-1Ti / Precision casting
loft 10.5°*
lie angle 59.5°*
face angle +0.5 *
volume 460cc
Hosel Inner Diameter 8.5mm
Hosel Depth 32mm
Base head weight (F5B1.5) 197.5g (±2g)

*This is the design value when the variable sleeve is STANDARD.
*Please note that some of the display specifications may be subject to change.
*The weights and other information shown are design values. Please note that they may differ slightly from the actual measurements.


Ballistic Table
of 85 Showing 1 - 40 results
1 2 3
of 85 Showing 1 - 40 results
1 2 3
Forward
to the next

For custom clubs, leave it to Daiichi Golf

  • When it comes to custom clubs, leave it to Daiichi Golf!
    A huge amount of information, a wealth of knowledge, and skilled craftsmanship gathered at long-established brick-and-mortar stores
  • PXG Gift Campaign
    [Target products] GEN7 Iron, Sugar Daddy III, BK OPS Series, LIMITED BLACK GOLD Series, ALLAN PUTTER
    *Limited to the first 30 people, valid until September 30th. *This gift can only be given once during the period.

Daiichi Golf Official Youtube

    PAGE TOP