FAQ what's new
Free shipping for orders over 11,000 yen
Giveaway
  1. HOME
  2. shaft
  3. Mitsubishi Chemical
  4. TENSEI Pro Orange 1K
  5. [Special Order Custom Club] KAMUI XP-03 Driver Mitsubishi Chemical Tensei Pro Orange 1k TENSEI Pro Orange 1k Shaft [Official Japanese Product]
  1. HOME
  2. head category
  3. driver
  4. [Special Order Custom Club] KAMUI XP-03 Driver Mitsubishi Chemical Tensei Pro Orange 1k TENSEI Pro Orange 1k Shaft [Official Japanese Product]
  1. HOME
  2. Hadras (glass coating)
  3. [Special Order Custom Club] KAMUI XP-03 Driver Mitsubishi Chemical Tensei Pro Orange 1k TENSEI Pro Orange 1k Shaft [Official Japanese Product]
■Estimated delivery date
Since this product is a Daiichi Golf original custom product, the normal delivery time is approximately 10 days .

*If the product is out of stock or sold out, you will be notified by email.

*Please note that orders cannot be canceled after they have been placed.


Recommended tune-up list
 
glass coating
effect
Prevent scratches on the club
Estimated delivery date
Approximately 2 days
▲Click on the image for details
Attaching weights
effect
Ease of swinging increases
Estimated delivery date
Approximately 2 days
▲Click on the image for details


Kamui's first variable sleeve function. Fly easily!
[Specially-made custom clubs]
KAMUI XP-03 Driver Mitsubishi Chemical Tensei Pro Orange 1k
TENSEI Pro Orange 1k shaft [Official Japanese product]

Item Number kamuixp03dr-72
List price ¥ 129,800 at the place
¥ 116,820 tax included
Member price available
[ 1,062 Points awarded ]
You must be logged in to purchase at the member price.
Quantity in stock 999
Paycredit cardBank transfer | Cash on delivery | Convenience store

*Sales prices at physical stores may vary depending on fitting, etc.

*We do not accept discount negotiations at physical stores when comparing online prices.

Top

A new brand for experienced and skilled golfers.
Fly gently.


KAMUI XP-03 Driver





[High-rigidity channel design with inner bridge and ribs]
A two-depth channel (groove) is designed at the front of the sole.
The circular channel from toe to heel and the deep channel in the center reduce distortion of the face when mis-hits occur in the toe-heel area or on the bottom of the face. The placement of channels from inside the head, bridges that support the weight ports, and ribs that cross the sole significantly increase sole rigidity, firmly absorbing the ball mass and shock of impact and maximizing the initial ball velocity.


[U-shaped DAT55G forged face and laser ultra-fine milling]
Zirconium titanium is subjected to a special strengthening heat treatment to create a material with properties that combine the strength to bounce the ball off with force, the toughness to bend the face, and the elasticity to quickly return the bent face to its original position.
In addition, the 360° full cup face structure with no welds on the face surface achieves a wide high initial velocity area.


[Flat crown/shallow back]
The shallow back, with reduced radius from the toe of the crown to the backsole, naturally results in an address with the right shoulder slightly lowered, making it easy to imagine aiming the ball at the target with a level blow without exerting any force.


[All black IP finish]
When setting up, you can place the head smoothly and take a roughly-positioned stance in a good way, and the face has a bold all-black IP finish.


[Variable hosel system]
Eight different trajectory heights, lofts, launch directions and lie angles can be adjusted. The loft is from 9° to 12°, and the lie angle is from 59.5° to 62°.
You can adjust the shaft depending on how you feel on that day. Also, by having multiple sleeves, you can easily reshaft the shaft.


spec

Head unit price: 68,000 yen (excluding tax)
Face material and manufacturing method DAT55G Titanium / Precision forged face
Body material and manufacturing method 8-1-1Ti / Precision casting
loft 10.5°*
lie angle 59.5°*
face angle +0.5 *
volume 460cc
Hosel Inner Diameter 8.5mm
Hosel Depth 32mm
Base head weight (F5B1.5) 197.5g (±2g)

*This is the design value when the variable sleeve is STANDARD.
*Please note that some of the display specifications may be subject to change.
*The weights and other information shown are design values. Please note that they may differ slightly from the actual measurements.


Ballistic Table




TENSEI Pro Orange 1k SeriesTENSEI Pro Orange 1k

That masterpiece has been reborn.
TENSEI Pro Orange 1K series


The TENSEI brand, which is supported by many top players including international major champions, has released a new, more powerful orange model.

The Pro Orange 1K series is based on the CK Pro Orange series released in 2019, and by further increasing the rigidity of the tip, it reduces the vertical deviation of the impact point caused by toe down.

In addition, by reducing the torque, the deviation in the left and right launch is also suppressed, reducing side spin, resulting in an evolved shaft that does not bend.

While maintaining the ease of swinging provided by the counterbalance design, the adoption of Xlink Tech optimizes the composition and structure of the matrix resin* to maximize the potential of the selected carbon fibers.

The lineup has been expanded to include the 50TX, 80S, and 80X, which were not available in the previous model, to provide ``world-class flight'' to a wide range of players.

Product features









spec






  1. HOME
  2. shaft
  3. Mitsubishi Chemical
  4. TENSEI Pro Orange 1K
  5. [Special Order Custom Club] KAMUI XP-03 Driver Mitsubishi Chemical Tensei Pro Orange 1k TENSEI Pro Orange 1k Shaft [Official Japanese Product]
  1. HOME
  2. head category
  3. driver
  4. [Special Order Custom Club] KAMUI XP-03 Driver Mitsubishi Chemical Tensei Pro Orange 1k TENSEI Pro Orange 1k Shaft [Official Japanese Product]
  1. HOME
  2. Hadras (glass coating)
  3. [Special Order Custom Club] KAMUI XP-03 Driver Mitsubishi Chemical Tensei Pro Orange 1k TENSEI Pro Orange 1k Shaft [Official Japanese Product]

Featured Products

Forward
to the next

PAGE TOP