On The Screw Xspire XR Driver | Daiichi Golf Online Shop

Hello {@ member.last_name @} {@ member.first_name @}

{@member.stage_name @}member {@ member.active_points @} points

business day calendar

muziik
On The Screw Xspire XR Driver

A distance-oriented head that uses turning power to send the ball flying.

The new Xspire XR has outstanding turning power and grip!!

By attaching 4g of light-weight ABS resin (black part) to the sole toe side and 16g of heavy-weight stainless steel plate to the sole heel side (red part), it provides quick turning power.

The following two types are available depending on the face angle.
break to the left+1.5° for slicers and ±0 to -0.5° for intermediate and advanced users.

Both have a W top line with a step at the top line of the crown to make it easier to hold straight.
It has been crafted so that the face appears straight.

The face is made of DAT51, which has good resilience, resulting in high distance performance.

Turning force 1. The stainless steel plate, which has a high specific gravity, generates the turning force.

A 15g stainless steel plate is placed on the heel side of the head.
By attaching a plate with a high specific gravity to the rear of the heel, the turning power of the head is increased.
We have achieved a strong trajectory with good catchability.

In addition, the stainless steel plate reduces distance loss and spin on heel hits.

The result is a driver with an appealing low spin trajectory.

Turning power 2. ABS resin with low specific gravity is placed on the toe side

Approximately 15g of titanium was removed from the sole and toe side and 3g of ABS resin was installed.
The synergistic effect with the stainless steel plate on the heel side creates powerful turning power.

In addition, the heel center of gravity structure reduces the toe-down phenomenon.
This produces a strong trajectory with low spin and little twist.

Available in two types: FA-0.5 and FA+1.5

The face material is DAT51.

The break to the left face FA+1.5 provides better catchability,
Square for golfers who don't want to go left but want to catch the ball-Available in two types: open face FA-0.5 and open face FA-0.5.

By improving the finish on the upper part of the face, the FA+1.5 has a square appearance, while the FA-0.5 has an open appearance.

The golf swing is three dimensional.
Even in this day and age when the shut-face swing is in vogue, the face must be open and then closed square.
Closing the face from the top to impact is not an easy task.

That's why some golfers struggle with break to the right or pushing.
Even for advanced players, they don't like the face going to the left, but they still have the desire to catch the ball and send it flying.

Turning power.
A new design that utilizes the head's ability to turn, leading to increased distance.

The Xspire XR makes its grand debut.

Product name	muziik Xspire XR Driver
FA	break to the left(H+1.5°)	Straight (±0 to 0.5°)
loft	9.5° to 11.5°	9.5° to 10.9°
Head material/manufacturing method	6-4 TITANIUM/Forged
Face Material	3mm DAT51 TITANIUM CNC FACE
Head Volume	Fits 460cc
Lie angle (°)	62
TIP inner diameter	8.6mm
TIP outer diameter	13.2mm
FP value	20mm
Face Height	52mm
Center of gravity distance	33mm
Center of gravity height	36mm
Center of gravity angle	26.5°
Head Weight	±194g
Selling price	63,000 yen (excluding tax)

*Special head cover included

Forward

to the next

For custom clubs, leave it to Daiichi Golf

A huge amount of information, a wealth of knowledge, and skilled craftsmanship gathered at long-established brick-and-mortar stores

[Target products] GEN7 Iron, Sugar Daddy III, BK OPS Series, LIMITED BLACK GOLD Series, ALLAN PUTTER
*Limited to the first 30 people, valid until September 30th. *This gift can only be given once during the period.