Daiichi Golf Original
[Daiichi Golf Original]
Cleveland
RTX Full Face 2 Wedge True Temper Project X LZ Shaft
Cleveland RTX FULL FACE2
Item Number
24rtxff2wg-24
List price
¥
37,400
at the place
¥
30,470
tax included
[
277
Points awarded ]
-
-
-
-
-
-
-
-
-
-
Quantity in stock
999
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
Head material | Soft iron |
Head manufacturing method | Lost wax precision casting + face laser milling |
finishing | Tour Satin |
Loft angle (°) | 50 | 52 | 54 | 56 | 58 | 60 | 64 |
Bounce angle (°) | 8 | 8 | Ten | Ten | 8 | 8 | 8 |
Lie angle (°) | 64 |
Face progression (mm) | 5.9 | 5.9 | 6.1 | 6.1 | 6.1 | 6.1 | 6.1 |
Club Length (inches) | 35.125 to 35.375 | 35.0 to 35.25 | 34.875~35.0 |
grip | Tour Velvet full rubber grip (no backline, with logo) <49.5g/caliber 60> |
●MADE IN JAPAN ●New groove rule compliant model
*Since emphasis is placed on spin performance, the ball may get scratched.
*The bend angle is the effective angle based on our own unique measurement method. Therefore, it may differ from the value obtained by general measurement methods.
PROJECT X LZ |
The new TWT (Triple Wall Technology) technology has increased the strength of the tip and butt sections, and maximized and optimized the energy conductivity in the "Loading Zone" in the middle of the shaft (compared to our previous products).
Not only has the shaft hardness been adjusted with an optimal taper rate for each flex, but the weight is also set significantly differently for each flex, ranging from 6.5/125g (approximately 118g after cutting) for tour players to 5.0/110g (approximately 102g after cutting) suitable for amateur golfers.
The external appearance is also different from previous Project X models, with a stepless shaft and a design that makes the LZ function visible at a glance.
After three wins on the PGA Tour in 2016, many tour players have switched to Project X LZ Steel.
|
flex | Shaft length | Tip Diameter | Butt Diameter | Weight after cutting | kick point |
6.5 | 40.0-36.5 inches (1.015-927 mm) | .355 inch (9.00 mm) | .600 inches (15.25) | 125g | Mid-tone |
6.0 | 120g |
5.5 | 115g |
5.0 | 110g |
・Project X series is a product that is weight-controlled, but vibration frequency is not controlled.
Regarding weight, there is a tolerance of about plus or minus 4g around the values stated in the specifications, fitting data, etc.
-Rifling structure: The internal rifling structure absorbs shaft vibrations, reducing strain on the body.
・Stepless: A type of shaft that has no steps.
-Weight control: The weight of each shaft is controlled within the tolerance range.
・Constant weight: All clubs are designed to be the same weight. Parallel weight varies depending on settings.