■Estimated delivery date
Normal shipping
|
Approximately 1 week (if in stock) |
■The sleeve and finished length will vary depending on the head you choose.
■The length is measured according to manufacturer standards and is the total length including the head.
■The sleeve is installed in the standard position.
■The shaft is a reverse insert with the logo on the back. If you have any preference, please write it in the comments section.
■Please note that balance adjustments are not possible.
■Please note that changes or cancellations cannot be made after the order has been confirmed.
Romaro Driver Compatible Products
Romaro Sleeved Shaft Graphite Design Tour AD VR Shaft
Item Number
romaro-shaft-34
[
420
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Quantity in stock
998
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
Romaro Driver Compatible Products
・Ray Alpha BLACK DRIVER
・Ray V-V2- 435/455 DRIVER
Special sleeve shaft
|
It was developed with the concept of maximizing the performance of the various head technologies that have been developed in recent years to achieve high initial velocity.
By increasing the rigidity of the grip, you can experience a sharp, powerful swing that can withstand strong turns, while the tip does not lose rigidity too much and suppresses overshooting, resulting in a strong impact and a natural flex. The right balance of rigidity between the grip and tip creates a swing with a sense of unity.
The design is based on a refreshing blue color scheme, and uses the same matte paint that was popular in the previous "IZ series." The vivid coloring expresses "strength" and "lightness."
Promotion of this product began on the domestic men's and women's tours in June 2018. The shaft performance and design have been well received by pro golfers!
| Product name |
flex |
Weight (g) |
Torque (deg) |
Tip diameter/Parallel
(mm) |
Butt diameter (mm) |
Kick Point |
| VR-4 |
R2 |
46 |
5.7 |
8.50/75 |
15.15 |
Medium tone |
| R1 |
47 |
5.6 |
| S |
47 |
| VR-5 |
R2 |
54 |
4.5 |
15.20 |
| R1 |
56 |
15.25 |
| S |
57 |
15.30 |
| X |
60 |
15.40 |
| VR-6 |
S.R. |
63 |
3.2 |
15.20 |
| S |
65 |
15.25 |
| X |
66 |
15.30 |
| VR-7 |
S |
73 |
3.0 |
15.35 |
| X |
75 |
15.40 |
| VR-8 |
S |
85 |
2.6 |
15.35 |
| X |
86 |
15.40 |
* Shaft length: 1168mm
■The tip diameter is the value when unpainted.
■How to cut the shaftWhen using it for a 1W, there is basically no need to cut the tip.When using it for a FW, etc., adjust the stiffness so that the insertion length into the hosel + tip cut does not exceed the parallel length of the tip of the shaft.
■Please note that inserting the tip of the shaft into the hosel beyond the parallel length, or grinding the tip of the shaft beyond the painted surface and then inserting it into the hosel may result in the shaft breaking.
■Please be careful not to tighten the shaft too much when assembling the club, measuring vibration frequency, or replacing the grip, as this may cause the shaft to crack.
■Specifications may be changed without notice due to improvements or other reasons.
