【Notes】 ■ Delivery time is about one week. It may take longer if parts are out of stock.
■The sleeve and finished length will vary depending on the head you choose.
■The length is measured according to manufacturer standards and is the total length including the head.
■The sleeve is installed in the standard position.
■The shaft is a reverse insert with the logo on the back. If you have any preference, please write it in the comments section.
■Please note that balance adjustments are not possible.
■Please note that changes or cancellations cannot be made after the order has been confirmed.
Pin driver compatible
PING Sleeved Shaft Gravity Vaccine Compo GR351 Shaft for Drivers
Item Number
pingss-46
[
1,000
Points awarded ]
-
-
-
-
-
-
-
-
-
-
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
PING genuine sleeve
(Note) Please check the compatible clubs before purchasing.
G 410 Series Mounting Model
|
[Compatible clubs]
■G410 Driver (2019)
*Not compatible with the old model G Series (2016)
|
G Series (2016) installed model
|
[Compatible clubs]
■G400 Driver ■G Driver ■G30 Driver
|
*Cannot be installed on i25 Driver・FW, G25 Driver, ANSER Driver・FW (2013).
Double counter design [Improved meet rate]
Easily control "heavy" and "light".
The metal is perfectly blended at the tip of the shaft and in the grip. Light objects feel heavy, making it easier to swing and increasing the hit rate, and heavy objects feel lighter, making it easier to swing and increasing head speed.
Achieves optimal weight distribution to suit the type of golfer.
FLAT FLEX design [directional stability]
Use the same swing from driver to iron.
Conventional golf clubs have different shaft vibrations for each club number, which causes the shot to lack stability. Therefore, we have adopted the "FLAT FLEX design" that makes the shaft vibrations uniform from the driver to the sand wedge. This completely new approach allows for further evolution of "flying" and "score improvement."
[Improved ball catchability]
With conventional shaft shapes, the tolerance for the KP was limited to ±10mm, but by moving the KP 60mm to the tip, it is possible to increase initial velocity and catch.
GR351 Product Specifications
| Hardness |
R |
S.R. |
S |
SX (※) |
| H/S suitability |
32～36 |
37～40 |
41～44 |
45 to 48 |
| Weight (g) |
42 |
45 |
49 |
52 |
| KP |
Ultra-advanced |
| torque |
7 |
6.5 |
6 |
6 |
| Frequency (cpm) |
204 |
221 |
238 |
255 |
| Product length (mm) |
1181 |
| B-150 |
15 |
15.2 |
15.3 |
15.4 |
| GCL(%) |
51 |
52 |
53 |
54 |
*The vibration frequency is a reference value when set to 46-inch D2 using the 60-degree measurement method.
Price: ¥100,000 (excluding tax) / 1 bottle
