PXG 0311 Black Ops TOUR-1 Driver
|
- Head shape: Compact head design, maintains large face shape
・Face shape: high, deep face design
・Side shape: thick when viewed from the side ・Strong crown curve
-Sole shape: The protruding part at the center of the sole is large, and the weight is placed at the rear (high crown design).
Points of interest
・Combination of high launch angle and low spin ・Amazing distance achieved ・Super fast ball speed ・Reduced dispersion of ball landing point ・Stable shots possible regardless of where on the face ・Explosive sound and feel
|
Black Ops TOUR-1 Technology that brings out performance
|
AMF Technology Black Ops uses Advanced Material Face (AMF) technology, which uses a proprietary titanium alloy face material that is stronger and more flexible, increasing face deflection at impact for significantly increased distance.
High-strength composite structure The lightweight inserts in the crown and sole are made from high-grade carbon fiber composite prepreg material, which is molded using an advanced compression process. The use of lightweight, high-strength parts allows for optimal weight distribution within the club head. This improves the moment of inertia and positions the center of gravity lower and further back, improving distance and forgiveness.
High-precision weighting technology The Black Ops driver comes with two replaceable light weights (2.5g) and one heavy weight (12.5g) in the sole, allowing you to adjust the spin and bias you want. Weights are available in 2.5, 5, 7.5, 10, 12.5, 15, 17.5, and 20 grams, allowing you to fine-tune the overall head weight and shot bias for each individual player. By adjusting the weights, you can increase the total moment of inertia to over 10,000g-cm2.
Different bulge and roll design faces are strategically adjusted in both lateral and vertical curvature to optimize driver performance. This design optimizes the club's response to off-center shots, improving forgiveness and overall performance. Robotic face grinding allows for faces with different bulge and roll curvature radii to be manufactured with high consistency.
Optimized Localized Face DesignThis proprietary design optimizes driver performance by providing consistent and efficient energy transfer regardless of impact anywhere on the club face, resulting in increased ball speeds and distance.
Optimized Natural Frequency: By fine-tuning the natural vibration patterns and resonances within the club head structure, we optimize the natural frequency to improve performance. This improves the feel, sound and performance of the driver at the moment of contact with the golf ball.
PXG 0311 Black Ops Driver Comparison
|
The Black Ops driver is available in two different head shapes.
You can choose from
BLACK OPS, which is designed for a wide range of golfers and provides amazing distance and ease of use, or
BLACK OPS TOUR-1 , a model for experienced golfers that significantly reduces spin.
PXG 0311 Black Ops TOUR-1 Driver Specifications
|
loft angle |
lie angle |
Club Length (inches) |
Head Mass |
8°, 9°, 10.5° LH 9° |
58.5° |
45.5" |
203g |
Default weight setting (may be changed depending on length, finish, etc.)
Toe: 2.5g
Heel: 12.5g
CRAZY brings you this masterpiece, made from high-elasticity 90t full-length carbon, the best product in CRAZY's history.
Guiding your swing... The ultimate in high-trajectory power with all the charm of Crazy.
The shaft follows the swing plane to the maximum extent possible, running from the top to the finish in one go. Being able to "swing comfortably" dramatically improves distance and direction. The unprecedented high trajectory, low spin, and wind-resistant ball quality produces big carry.
Experience greater distance, direction, and the ball's "slow, long flight" effect than ever before. |
CRAZY 9 Dia
Lightweight type "Strong bounce"
flex |
Weight (±3g) |
torque |
Tip (mm) |
length |
kick point |
R2 |
52 |
4.2 |
8.5 |
46 |
Medium tone |
R |
54 |
4.2 |
8.5 |
46 |
Medium tone |
S.R. |
56 |
4.2 |
8.5 |
46 |
Medium tone |
S |
58 |
4.2 |
8.5 |
46 |
Medium tone |
*Notes regarding 90t Shaft
CRAZY-9 is designed and manufactured using a combination of Hi Carbon sheets such as 40t, 46t, and 90t.
Compared to conventional products, this product uses a lot of thin fibers (sheets) with a high elasticity, so please be careful about heating and the number of times you heat it when replacing the shaft.
*Made in Japan
Price: 120,000 yen (excluding tax) per bottle