Realizes a dual bellows structure with a newly arranged "bellows crown".
Even higher initial velocity with the triple impact of face x sole x crown.
|
- High initial velocity design with advanced dual bellows structure
- Mid-back shape for easy grip
・Expansion of high initial velocity areas above and below the face
Points of interest
|
Compared to the previous model, the carbon crown lowers the center of gravity. 2 bellows on the crown, 4 bellows on the sole, It has a total of 6 bellows and is named BB-6. (BB4 means bellows: Bellows has four meanings) |
|
About the club president BB4: 45.5 inches If you install the same shaft as the previous work,
SB-01: 45.75 inches (0.25 long) BB6: 45.5 inches
*BB4 and BB6 are approximately the same size. *If you attach the SB-01 shaft to BB6, it will be 0.25 shorter.
|
The neck adjustment function allows you to choose the optimal position according to the golfer's physical condition, course layout, and weather.
The neck adjustment function structure allows you to adjust the loft angle, lie angle, and face angle, so you can adjust the ball grip, launch direction, and launch height.
CRAZY brings you this masterpiece, made from high-elasticity 90t full-length carbon, the best product in CRAZY's history.
Guiding your swing... The ultimate in high-trajectory power with all the charm of Crazy.
The shaft follows the swing plane to the maximum extent possible, running from the top to the finish in one go. Being able to "swing comfortably" dramatically improves distance and direction. The unprecedented high trajectory, low spin, and wind-resistant ball quality produces big carry.
Experience greater distance, direction, and the ball's "slow, long flight" effect than ever before. |
CRAZY 9 Dia
Lightweight type "Strong bounce"
flex |
Weight (±3g) |
torque |
Tip (mm) |
length |
kick point |
R2 |
52 |
4.2 |
8.5 |
46 |
Medium tone |
R |
54 |
4.2 |
8.5 |
46 |
Medium tone |
S.R. |
56 |
4.2 |
8.5 |
46 |
Medium tone |
S |
58 |
4.2 |
8.5 |
46 |
Medium tone |
*Notes regarding 90t Shaft
CRAZY-9 is designed and manufactured using a combination of Hi Carbon sheets such as 40t, 46t, and 90t.
Compared to conventional products, this product uses a lot of thin fibers (sheets) with a high elasticity, so please be careful about heating and the number of times you heat it when replacing the shaft.
*Made in Japan
Price: 120,000 yen (excluding tax) per bottle