Realizes a dual bellows structure with a newly arranged "bellows crown".
Even higher initial velocity with the triple impact of face x sole x crown.
|
- High initial velocity design with advanced dual bellows structure
- Mid-back shape for easy grip
・Expansion of high initial velocity areas above and below the face
Points of interest
|
Compared to the previous model, the carbon crown lowers the center of gravity. 2 bellows on the crown, 4 bellows on the sole, It has a total of 6 bellows and is named BB-6. (BB4 means bellows: Bellows has four meanings) |
|
About the club president BB4: 45.5 inches If you install the same shaft as the previous work,
SB-01: 45.75 inches (0.25 long) BB6: 45.5 inches
*BB4 and BB6 are approximately the same size. *If you attach the SB-01 shaft to BB6, it will be 0.25 shorter.
|
The neck adjustment function allows you to choose the optimal position according to the golfer's physical condition, course layout, and weather.
The neck adjustment function structure allows you to adjust the loft angle, lie angle, and face angle, so you can adjust the ball grip, launch direction, and launch height.
The Speeder SLK, a short shaft released in April 2019, is characterized by the fact that "club balance does not change even if the club is shortened by 1 inch!" and is specialized for improving hit rate and high operability. It has been accepted by a wider range of golfers than initially expected.
The Type-D (Distance) model, which pursues even greater distance performance than the SLK, uses high-elasticity carbon to increase head speed and increases tip rigidity for stronger impact, achieving both high distance performance and the same level of controllability as before.
Metal Composite Technology
By combining the metal tubes used in the MCI, the conflicting issues of shortening the club length and club balance are resolved.
Multi-hoop ply laminate
By laminating multiple hoop layers along the entire length, the shaft is prevented from collapsing and deformation, allowing for smooth return to its original shape.
Low torque design (*New technology of Type-D)
By bias laminating high elasticity carbon throughout, including the ultra-high elasticity 90t layer, the torque is lower than that of the SLK and EVOLUTION series.
Multi-layered TORAYCA RT1100G (new technology of Type-D)
By laminating multiple layers of Toray's high-strength, high-elasticity carbon "Torayca RT1100G" at the tip, high tip rigidity and strength are achieved.
Model name |
flex |
Product Manager |
weight |
torque |
Tip diameter |
Butt diameter |
condition |
Type-D 40 |
One Flex |
45.0 |
49.5 |
4.8 |
8.50 |
15.20 |
During ~ |
Type-D 50 |
58.0 |
3.8 |
15.40 |
Type-D 60 |
66.0 |
2.9 |
15.60 |
*The price is the manufacturer's suggested retail price. Assembly and grip costs are not included.
*Bat diameter is 150mm from the end of the bat.
*Flexible hours are not available.
Price: 50,000 yen (excluding tax)