Realizes a dual bellows structure with a newly arranged "bellows crown".
Even higher initial velocity with the triple impact of face x sole x crown.
|
・High initial velocity design with advanced dual bellows structure
・Mid-bag shape that is easy to hold
・Expansion of high initial velocity areas above and below the face
・Two types of loft designs with a choice of launch angle
|
Points of interest
|
9.5° for those who liked the first generation BB4
For those who liked SB-01, 10.5° is recommended.
|
| |
Compared to the previous model, the carbon crown lowers the center of gravity.
2 bellows on the crown, 4 bellows on the sole,
It has a total of 6 bellows and is named BB-6. (BB4 means bellows: Bellows has four meanings) |
| |
About the club president
BB4: 45.5 inches If you install the same shaft as the previous work,
SB-01: 45.75 inches (0.25 long)
BB6: 45.5 inches
*BB4 and BB6 are approximately the same size.
*If you attach the SB-01 shaft to BB6, it will be 0.25 shorter.
|
|
Comparison of BB6 & BB4 SB-01
|
Comparison 1: Expansion of high initial velocity area with dual bellows structure
The crown has a bellows structure to achieve high initial velocity in the upper area of the face.
Comparison 2: The crown part has a bellows structure, achieving high initial velocity in the upper area of the face.
By joining a lightweight carbon sheet to the bellows crown of the bridge structure, a high moment of inertia is achieved by reducing the weight in the center of the crown.
Comparison 3: Two types of loft settings to choose from
In addition to the basic loft of 10.5 degrees, by setting the basic loft of 9.5 degrees, the loft can be set from 8.5 degrees to 11.5 degrees (in 0.5 degree intervals).
|
Advanced dual bellows structure
|
The newly developed BB6, in addition to the bellows sole structure (bellows structure) that is a feature of the BB4, also incorporates a bellows structure in the center of the crown in a bridge shape, making it possible to increase the initial velocity of the ball by utilizing the flexure of the entire head. Did.
In addition, to hide the bellows structure of the crown, a lightweight carbon sheet is glued to the crown, making it possible to achieve a natural alignment.
The neck adjustment function allows you to choose the optimal position according to the golfer's physical condition, course layout, and weather.
The neck adjustment function structure allows you to adjust the loft angle, lie angle, and face angle, so you can adjust the ball grip, launch direction, and launch height.
Double kick pointIt's a wonderful world where there is neither tip bending nor hand bending.
It is generally said that break to the right have good tip flex and hookers have good grip flex.
In fact, after fitting many people, we found that this does not adequately solve the problem for people who break to the right.
The term "tip flexibility" refers to a state in which the tip is soft and the grip is hard. The manufacturing method is to make the middle grip harder in order to make the tip easier to swing.
If your grip is stiff, it will be difficult to tighten your right armpit when changing direction in your swing.
When the shaft feels stiff when moving from the top of the swing to the downswing, tension is generated in an instant, making it difficult to close your right armpit.
In other words, this encourages an outside-in swing, resulting in an even larger cut shot.
Not only is the trajectory not improving, but there are more heel hits and the ball trajectory is low and doesn't fly well even when it is hit.
Double kick shaftThat is, the grip is soft, the right armpit is tight on the downswing, the trajectory is stable, and the tip is also sufficiently flexible.
It's a great kick point that combines the best of both hand flex and tip flex.
The reason why there are so few shafts with such an excellent kick point on the market is due to a lack of awareness on the part of manufacturers and the difficulty of the manufacturing process.
From a manufacturing perspective, it is not easy to create a large pause and then have the head move quickly from there.
This was made possible byThe latest work from Crime of Angel,Roxy Angelis.
Available in four hardness levels: 4, 5, 6, and 7 , and with nice weights of 52g, 57g, 62g, and 77g !
The performance of the Roxy makes it such a special shaft that those who break to the right will wonder if there has ever been a shaft that is this easy to swing!
Think again about the movement of a person's arm. You can see that there is a kick point at the elbow and wrist to throw the ball far and accurately!
The movement of the arm is very similar to that of a human arm.Roxy AngelThat's it.
Not only is it easier for golfers who break to the right, but it also improves their form and makes the ball trajectory closer to a straighter one.
The best shaft todayWe can say that!
Junichi Irie, CEO of Daiichi Golf
| Model name |
ROXY Angel |
| Shaft Flex |
IV (equivalent to R) |
V (equivalent to SR) |
Ⅵ (equivalent to S) |
VII (equivalent to SX) |
| weight |
52g |
57g |
62g |
77g |
| Frequency |
240cpm |
252cpm |
262cpm |
275cpm |
| kick point |
MID-LOW |
| Detailed figures |
Length: 46Inch / Tip diameter: 8.5mm / Butt diameter: 15.3mm |
| price |
58,000 yen (excluding tax) |
