Super Monster UT's long-awaited debut
[Specially-made custom clubs]
Music
ON THE SCREW DU2 HEAVEN Utility True Temper Dynamic Gold EX Tour Issue
Item Number
musicdu2ut-24
-
Custom (estimated delivery time: about 1 week)
List price
¥
53,900
at the place
¥
48,510
tax included
[
441
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
loft angle
Expected shipping date
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
The long-awaited debut of Super Monster UT.
muziik muziik DU2 HEAVEN Utility |
Compared to the previous DU model, the overall face is cleaner.
The face gives the impression that it is easy to hold.
The sole is equipped with a heavier stainless steel plate than the previous model.
The center of gravity has been lowered by 4.7 mm, resulting in a lower center of gravity.
The same non-rotating sleeve as the DD2 and DF2 shafts is used.
The loft and lie can be adjusted.
Easy to hold and deep back shape for hitting |
The shape is easy to set up, with beautiful curves from the face to the crown and back face.
The deep back structure allows you to hit the ball just like an iron, reducing energy loss.
This also leads to an increase in initial velocity. Furthermore, it is well-known for its resilience and good feel.
DAT55G titanium is used for the face.
This is a utility that achieves distance comparable to that of a fairway wood.
※Matte finish
Stainless steel sole plate and adjustable screws |
Like the previous model, the stainless steel sole plate is removable (#3/75g, #4/81g)
Equipped with 4 Phillips head screws weighing 10g each.
The screws are also available separately in 3.5g, allowing you to adjust the weight.
Uses a FW-specific sleeve that prevents the shaft from rotating. |
Like the DD2 and DF2, it uses a sleeve that does not rotate the shaft axis.
There are four loft settings: -1°, standard, +1°, and +2°.
There are two lie angles available: standard and DRAW (+1° upright).
A total of eight different settings are available.
*The sleeve cannot be used with DD2 or DF2.
Head price: 60,000 yen + tax
(Sold separately) Dedicated head cover 3,000 yen + tax
(Sold separately) Head sleeve wrench 3,000 yen + tax
(Sold separately) Special sleeve 4,000 yen + tax
(Sold separately) Weight 3.5g 1,000 yen + tax *Standard is 2.5g x 4
*Cannot be removed with a special wrench for sleeves
Dynamic Gold EX Tour Issue
New "Weight Lock" technology provides the same performance for all players Previously, Tour Issue irons were roughly divided into three groups based on the weight of each individual iron, and were selected so that the tolerance between sets within each group was within the regulations. However, even if the same S200 Tour Issue set was used, there was actually a slight weight difference when comparing sets from different groups. In other words, the weight tolerance between the iron sets I own is the same, but the basic weight is different when comparing your Tour Issue irons to my Tour Issue irons.
The new "Weight Lock" technology, for which a patent is pending, has been developed to eliminate the weight tolerances between sets that arise due to individual differences.
"Weight Lock" technology is a technology that eliminates individual differences in manufacturing by attaching a special material weight inside the shaft according to the difference from the basic weight. Of course, it is attached in a place that does not affect the flex, kick point, or performance of the shaft itself. Dynamic Gold EX Tour Issue, which was one of the first to adopt this technology, achieves tighter weight tolerances on the manufacturing line and at the same time, by attaching a "weight lock", all shafts are finished as products with the same specification weight and tolerance. In other words, it means that it is a "Tour Player Weight Shaft" that provides the same performance to all players, regardless of whether they are professional or amateur.
|
flex |
Product Manager |
Weight before cutting (g) |
Butt diameter (mm) |
Tip diameter (mm) |
Kick Point |
DGIX- WL-HTX1 |
X100 |
40.5-37.0 inches (1029-940mm) |
132 |
15.25 |
9.00 |
Original condition |
DGIS- WL-HTS2 |
S200 |
131 |
Suitable head speed: 46m/s~(X), 40~48m/s(S)
Application: Iron, Dip: Tapered
*There is a "weight lock" attached to the inside of the shaft, so please do not press the inside with a stick or anything else. This may damage the "weight lock."
*Please do not use solvents such as paint thinner to wipe the printed surface as this may cause the print to peel off. Please also note that the print may peel off depending on the usage conditions or over many years of use.