Super Monster UT's long-awaited debut
[Specially-made custom clubs]
Music
On the Screw DU2 HEAVEN Utility
NSPRO Modus3 120 shaft
Item Number
musicdu2ut-20
-
Custom (estimated delivery time: about 1 week)
List price
¥
49,500
at the place
¥
44,550
tax included
[
405
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
loft angle
Expected shipping date
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
The long-awaited debut of Super Monster UT.
muziik muziik DU2 HEAVEN Utility |
Compared to the previous DU model, the overall face is cleaner.
The face gives the impression that it is easy to hold.
The sole is equipped with a heavier stainless steel plate than the previous model.
The center of gravity has been lowered by 4.7 mm, resulting in a lower center of gravity.
The same non-rotating sleeve as the DD2 and DF2 shafts is used.
The loft and lie can be adjusted.
Easy to hold and deep back shape for hitting |
The shape is easy to set up, with beautiful curves from the face to the crown and back face.
The deep back structure allows you to hit the ball just like an iron, reducing energy loss.
This also leads to an increase in initial velocity. Furthermore, it is well-known for its resilience and good feel.
DAT55G titanium is used for the face.
This is a utility that achieves distance comparable to that of a fairway wood.
※Matte finish
Stainless steel sole plate and adjustable screws |
Like the previous model, the stainless steel sole plate is removable (#3/75g, #4/81g)
Equipped with 4 Phillips head screws weighing 10g each.
The screws are also available separately in 3.5g, allowing you to adjust the weight.
Uses a FW-specific sleeve that prevents the shaft from rotating. |
Like the DD2 and DF2, it uses a sleeve that does not rotate the shaft axis.
There are four loft settings: -1°, standard, +1°, and +2°.
There are two lie angles available: standard and DRAW (+1° upright).
A total of eight different settings are available.
*The sleeve cannot be used with DD2 or DF2.
Head price: 60,000 yen + tax
(Sold separately) Dedicated head cover 3,000 yen + tax
(Sold separately) Head sleeve wrench 3,000 yen + tax
(Sold separately) Special sleeve 4,000 yen + tax
(Sold separately) Weight 3.5g 1,000 yen + tax *Standard is 2.5g x 4
*Cannot be removed with a special wrench for sleeves
NSPRO MODUS3 Tour 120
The unprecedented tour specs have been praised by professionals both in Japan and overseas. Even tour professionals who control the trajectory freely and put everything into each shot are convinced. For competitive players who want results at a fine level, we recommend the new category MODUS3. You can experience a shot that is different from your usual one.
You can control everything about your flight!
Even tour professionals are amazed at the control and trajectory.
|
|
■ New control design based on a unique concept.
●Strong trajectory with a tip with high rigidity
The high rigidity design suppresses unnecessary spin, makes impact accurate, and enables strong trajectory flight.
●The lower rigidity of the mid section (Mid) controls the flex
The low rigidity design improves shaft control performance, making it accessible to players of any swing tempo.
●Comfortable feeling with low rigidity of the handle (butt)
Low hand stiffness provides a soft feel, smooth impact, great feel, and improved swing tempo.
|
product name |
flex |
Weight (g) |
Balance Point |
torque |
kick point |
NSPRO MODUS3 Tour 120 |
R | 111 | 50.0~50.3 | 2.0–1.7 | Mid/early |
S | 114 | 50.1~50.2 | 1.8~1.6 | Mid/early |
X | 120 | 50.2 to 50.3 | 1.7~1.5 | Mid/early |
TX | 126 | 50.4 to 50.5 | 1.6–1.4 | Mid/early |
|
What is MODUS3? It is possible to perfectly control all three elements of the trajectory required for iron shafts, which are the characteristics of iron shafts: height/low/left/right, distance, and direction. ”. |