Compatible with MCW・Tour model with increased ease and error tolerance for each count
Miura Giken TC-101 Iron True Temper Dynamic Gold 85/95/105/120 Shaft
Item Number
tc101-ttdg105
-
average
-
athlete
-
Custom (estimated delivery time: approximately 2 weeks)
[
330
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Quantity in stock
991
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
The birth of the Tour Cavity Iron, the successor to the CB-1008.
|
Successor model of CB-1008, which recorded the highest sales among all Miura models.
|
Miura's first weight-specific design based on the series' widest sole and dent design
|
Tour model with increased ease and error tolerance for each count
|
It has been four years since the release of the CB-1008, which debuted in 2016 and was supported by the most players in Miura history.
The new 100 series TC-101 Forged Iron has been born, inheriting the concept of CB-1008 and further improving its performance.
The initial "TC" of TC-101 comes from TOUR CAVITY. As the name suggests, this model is designed primarily for use on tours where highly accurate shots are required.
There is a noticeable tendency among today's competitive players to seek ``gentleness'' in performance while being particular about feel and form. The TC-101 has the widest sole width in the history of the series, giving it a deep center of gravity, and the visually distinctive blade has a dented shape, which distributes the squeezed weight between the toe and heel. The amount of distribution was optimized according to the role of long irons, middle irons, and short irons.
Designed by size (combination iron) using the company's first soft iron forging method, the long irons have a high moment of inertia and achieve a gentle and highly straight trajectory, while the short irons have the unique MIURA strike that is thick yet soft. Both feel and high operability are achieved. Compared to the previous model, all numbers have improved recovery performance on mis-hits.
Of course, it also supports full customization of Miura Craftsman World.
Enjoy your own special version.
Material/manufacturing method |
Soft iron (S20C) Precision forged WDD Accurate Forged W Nickel chrome deep satin finish |
count |
Four |
Five |
6 |
7 |
8 |
9 |
Pw |
Loft angle (°) |
twenty three |
26 |
29 |
33 |
37 |
41 |
46 |
Lie angle (°) |
60 |
60.5 |
61 |
61.5 |
62 |
62.5 |
63 |
Weight (g) |
250 |
257 |
264 |
271 |
278 |
286 |
294 |
FP (mm) |
3 |
3.3 |
3.7 |
Four |
4.3 |
4.5 |
Five |
Bounce angle (°) |
2 |
3 |
Four |
Five |
6 |
8 |
Ten |
Price: ¥25,000+tax (¥27,500 tax included)/1 piece
*We cannot sell the head alone.
*Weight may vary slightly
The new DG series (DG95/DG105/DG120) was developed over a period of more than three years. By adopting new materials, heat treatment, Variable Wall Technology (VWT), an original shaft that varies the thickness in multiple places, and a new step pattern, the new DG series offers the same feeling as the previous Dynamic Gold model while achieving even greater performance.
In particular, the DG95 model, which was released first in Japan, is lightweight at around 90g, but by having a similar stiffness curve to the conventional DG model, it achieves the same stickiness and controllability as the DG, despite being a lightweight shaft.
The greatest advantages of lightweight shafts -- ease of swing and distance -- have been further improved, and by setting the kick point at a mid-kick point for the DG95 and at a kick-kick point for the DG105/120, we have achieved a balance with controllability. |
*Do not wipe the printed surface with solvents such as thinner, as this may cause the printing to peel off.
Please note that the print may peel off depending on the length of use and the conditions of use.
Dynamic Gold 95
Application |
Tip |
flex |
Shaft length |
Tip Diameter |
Butt Diameter |
Weight before cutting |
Weight after cutting |
Kick Point |
iron |
taper |
S200 |
38.5-35.0 (978-889) |
.355 inch (9.00mm) |
.600 inch (15.25mm) |
95g |
— |
Mid-tone |
iron |
taper |
R300 |
38.5-35.0 (978-889) |
.355 inch (9.00mm) |
.600 inch (15.25mm) |
95g |
— |
Mid-tone |
Dynamic Gold 105
Application |
Tip |
flex |
Shaft length |
Tip Diameter |
Butt Diameter |
Weight before cutting |
Weight after cutting |
Kick Point |
iron |
taper |
X100 |
41.0-37.0 (1,041 -940) |
.355 inch (9.00mm) |
.605 inch (15.37mm) |
105g |
— |
Original condition |
iron |
taper |
S200 |
41.0-37.0 (1,041 -940) |
.355 inch (9.00mm) |
.600 inch (15.25mm) |
103g |
— |
Original condition |
iron |
taper |
R300 |
41.0-37.0 (1,041 -940) |
.355 inch (9.00mm) |
.600 inch (15.25mm) |
101g |
— |
Original condition |
Dynamic Gold 120
Application |
Tip |
flex |
Shaft length |
Tip Diameter |
Butt Diameter |
Weight before cutting |
Weight after cutting |
Kick Point |
iron |
taper |
X100 |
41.0-37.0 (1,041 -940) |
.355 inch (9.00mm) |
.600 inch (15.25mm) |
120g |
— |
Original condition |
iron |
taper |
S200 |
41.0-37.0 (1,041 -940) |
.355 inch (9.00mm) |
.600 inch (15.25mm) |
118g |
— |
Original condition |
iron |
taper |
R300 |
41.0-37.0 (1,041 -940) |
.355 inch (9.00mm) |
.600 inch (15.25mm) |
116g |
— |
Original condition |
Introducing the lightest Dynamic Gold ever, the DYNAMIC GOLD 85! Using new alloys and manufacturing processes, we have finally succeeded in developing the lightest Dynamic Gold ever, and have added it to the DG series as the new product Dynamic Gold 85!
Simply making the shaft lighter does not make it "Dynamic Gold". Dynamic Gold is especially popular among tour professionals and top athlete golfers, and must meet strict requirements to ensure it performs at its best under any circumstances. Thanks to its accumulated track record and know-how cultivated on the professional stage, Dynamic Gold 85 has cleared all of these requirements and has succeeded in achieving the maximum ball initial velocity, launch angle, and flight distance of any shaft in the 80g range.
The butt diameter is set thinner than comparable products from other companies to improve the impact sensation and tune it for a softer feeling. In addition, the tip is about 18% softer than other products, resulting in a high trajectory and smooth impact.
Even if you currently use a carbon shaft, you can enjoy the performance that only a steel shaft can provide with the Dynamic Gold 85, the lightest Dynamic Gold shaft ever, created using a new alloy and manufacturing process.
|
flex |
Product Manager |
Weight before cutting (g) |
Butt diameter (mm) |
Tip diameter (mm) |
Kick Point |
DG85IS2-HT |
S200 |
35.0-38.5 inches (889-978 mm) |
87 |
14.70 |
9.00 |
Medium tone |
DG120IS-HTS2-V |
R300 |
35.0-38.5 inches (889-978 mm) |
86 |
14.70 |
9.00 |
Medium tone |