Excellent sense of relief. semi-goose hollow iron
Miura Giken IC-602 Iron True Temper Project X LZ Shaft
Item Number
ic602-ttpxlz
[
410
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Quantity in stock
992
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
| The slightly smaller head size and thick face thickness provide a hitting feel that surpasses that of soft iron forging. |
| The loft angle and FP value are optimized based on a vast amount of fitting data. |
| The versatile sole is compatible with a wide range of head angles, ensuring the ultimate feeling of release. |
The hollow iron head was born, without any compromise, and in pursuit of the ultimate performance as a Miura iron.
|
1. The slightly smaller head size and thick face create a hitting feel that surpasses that of soft iron forging.
|
The faces of #3 to #9 are made of chrome molybdenum steel, which has good resilience. By deliberately designing the face thick, we have achieved not only great distance performance, but also a solid and comfortable hitting feel that sets us apart from conventional hollow irons.
In addition, S35C is used for the face of the Pw and Gw, in pursuit of even better hitting feel and directional performance.
The head size is small enough to be easily handled by intermediate to advanced players, and the shape also takes ball control into consideration.
|
2. The loft angle and FP value are optimized based on a vast amount of fitting data.
|
Based on the vast amount of test shot data obtained from Miura's unique fitting "9 Position Fitting" (patented), which focuses on the relationship between FP value and impact loft, the FP value is set to achieve the optimal trajectory for each club's loft. By achieving the optimal impact loft, it is possible to transfer swing energy to the ball without loss.
|
3. The versatile sole is compatible with a wide range of head angles, ensuring a breathtaking, flawless feel.
|
The Versatile Sole was born from repeated testing of the wedge sole shape, starting from a bounce angle of 0°, in pursuit of the optimum balance between bounce angle and sole width.
After many years of development, the idea evolved into the new Miura Versatile Sole (MVS) for irons.
It can accommodate swings with a wide range of angles of attack, and the sole shape is suitable for any lie, allowing it to firmly grip the ball, while the step at the rear of the sole does not slow down the head after impact, allowing for the ultimate feeling of release.
*The head cannot be sold alone.
*There may be some variation in weight.
| PROJECT X LZ |
The new TWT (Triple Wall Technology) technology has increased the strength of the tip and butt sections, and maximized and optimized the energy conductivity in the "Loading Zone" in the middle of the shaft (compared to our previous products).
Not only has the shaft hardness been adjusted with an optimal taper rate for each flex, but the weight is also set significantly differently for each flex, ranging from 6.5/125g (approximately 118g after cutting) for tour players to 5.0/110g (approximately 102g after cutting) suitable for amateur golfers.
The external appearance is also different from previous Project X models, with a stepless shaft and a design that makes the LZ function visible at a glance.
After three wins on the PGA Tour in 2016, many tour players have switched to Project X LZ Steel.
|
| flex | Shaft length | Tip Diameter | Butt Diameter | Weight after cutting | kick point |
| 6.5 | 40.0-36.5 inches (1.015-927 mm) | .355 inch (9.00 mm) | .600 inches (15.25) | 125g | Mid-tone |
| 6.0 | 120g |
| 5.5 | 115g |
| 5.0 | 110g |
・Project X series is a product that is weight-controlled, but vibration frequency is not controlled.
Regarding weight, there is a tolerance of about plus or minus 4g around the values stated in the specifications, fitting data, etc.
-Rifling structure: The internal rifling structure absorbs shaft vibrations, reducing strain on the body.
・Stepless: A type of shaft that has no steps.
-Weight control: The weight of each shaft is controlled within the tolerance range.
・Constant weight: All clubs are designed to be the same weight. Parallel weight varies depending on settings.
