The slightly smaller head size and thick face thickness provide a hitting feel that surpasses that of soft iron forging. |
The loft angle and FP value are optimized based on a vast amount of fitting data. |
The versatile sole is compatible with a wide range of head angles, ensuring the ultimate feeling of release. |
The hollow iron head was born, without any compromise, and in pursuit of the ultimate performance as a Miura iron.
1. The slightly smaller head size and thick face create a hitting feel that surpasses that of soft iron forging.
|
The faces of #3 to #9 are made of chrome molybdenum steel, which has good resilience. By deliberately designing the face thick, we have achieved not only great distance performance, but also a solid and comfortable hitting feel that sets us apart from conventional hollow irons.
In addition, S35C is used for the face of the Pw and Gw, in pursuit of even better hitting feel and directional performance.
The head size is small enough to be easily handled by intermediate to advanced players, and the shape also takes ball control into consideration.
2. The loft angle and FP value are optimized based on a vast amount of fitting data.
|
Based on the vast amount of test shot data obtained from Miura's unique fitting "9 Position Fitting" (patented), which focuses on the relationship between FP value and impact loft, the FP value is set to achieve the optimal trajectory for each club's loft. By achieving the optimal impact loft, it is possible to transfer swing energy to the ball without loss.
3. The versatile sole is compatible with a wide range of head angles, ensuring a breathtaking, flawless feel.
|
The Versatile Sole was born from repeated testing of the wedge sole shape, starting from a bounce angle of 0°, in pursuit of the optimum balance between bounce angle and sole width.
After many years of development, the idea evolved into the new Miura Versatile Sole (MVS) for irons.
It can accommodate swings with a wide range of angles of attack, and the sole shape is suitable for any lie, allowing it to firmly grip the ball, while the step at the rear of the sole does not slow down the head after impact, allowing for the ultimate feeling of release.
*The head cannot be sold alone.
*There may be some variation in weight.
Dynamic Gold EX Tour Issue
New "Weight Lock" technology provides the same performance for all players Previously, Tour Issue irons were roughly divided into three groups based on the weight of each individual iron, and were selected so that the tolerance between sets within each group was within the regulations. However, even if the same S200 Tour Issue set was used, there was actually a slight weight difference when comparing sets from different groups. In other words, the weight tolerance between the iron sets I own is the same, but the basic weight is different when comparing your Tour Issue irons to my Tour Issue irons.
The new "Weight Lock" technology, for which a patent is pending, has been developed to eliminate the weight tolerances between sets that arise due to individual differences.
"Weight Lock" technology is a technology that eliminates individual differences in manufacturing by attaching a special material weight inside the shaft according to the difference from the basic weight. Of course, it is attached in a place that does not affect the flex, kick point, or performance of the shaft itself. Dynamic Gold EX Tour Issue, which was one of the first to adopt this technology, achieves tighter weight tolerances on the manufacturing line and at the same time, by attaching a "weight lock", all shafts are finished as products with the same specification weight and tolerance. In other words, it means that it is a "Tour Player Weight Shaft" that provides the same performance to all players, regardless of whether they are professional or amateur.
|
flex |
Product Manager |
Weight before cutting (g) |
Butt diameter (mm) |
Tip diameter (mm) |
Kick Point |
DGIX- WL-HTX1 |
X100 |
40.5-37.0 inches (1029-940mm) |
132 |
15.25 |
9.00 |
Original condition |
DGIS- WL-HTS2 |
S200 |
131 |
Suitable head speed: 46m/s~(X), 40~48m/s(S)
Application: Iron, Dip: Tapered
*There is a "weight lock" attached to the inside of the shaft, so please do not press the inside with a stick or anything else. This may damage the "weight lock."
*Please do not use solvents such as paint thinner to wipe the printed surface as this may cause the print to peel off. Please also note that the print may peel off depending on the usage conditions or over many years of use.