Excellent sense of relief. semi-goose hollow iron
Miura Giken IC-602 Iron Fujikura Fujikura
MCI 50-110 Shaft
Item Number
ic602-fujimci
[
400
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Quantity in stock
999
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
The slightly smaller head size and thick face thickness provide a hitting feel that surpasses that of soft iron forging. |
The loft angle and FP value are optimized based on a vast amount of fitting data. |
The versatile sole is compatible with a wide range of head angles, ensuring the ultimate feeling of release. |
The hollow iron head was born, without any compromise, and in pursuit of the ultimate performance as a Miura iron.
1. The slightly smaller head size and thick face create a hitting feel that surpasses that of soft iron forging.
|
The faces of #3 to #9 are made of chrome molybdenum steel, which has good resilience. By deliberately designing the face thick, we have achieved not only great distance performance, but also a solid and comfortable hitting feel that sets us apart from conventional hollow irons.
In addition, S35C is used for the face of the Pw and Gw, in pursuit of even better hitting feel and directional performance.
The head size is small enough to be easily handled by intermediate to advanced players, and the shape also takes ball control into consideration.
2. The loft angle and FP value are optimized based on a vast amount of fitting data.
|
Based on the vast amount of test shot data obtained from Miura's unique fitting "9 Position Fitting" (patented), which focuses on the relationship between FP value and impact loft, the FP value is set to achieve the optimal trajectory for each club's loft. By achieving the optimal impact loft, it is possible to transfer swing energy to the ball without loss.
3. The versatile sole is compatible with a wide range of head angles, ensuring a breathtaking, flawless feel.
|
The Versatile Sole was born from repeated testing of the wedge sole shape, starting from a bounce angle of 0°, in pursuit of the optimum balance between bounce angle and sole width.
After many years of development, the idea evolved into the new Miura Versatile Sole (MVS) for irons.
It can accommodate swings with a wide range of angles of attack, and the sole shape is suitable for any lie, allowing it to firmly grip the ball, while the step at the rear of the sole does not slow down the head after impact, allowing for the ultimate feeling of release.
*The head cannot be sold alone.
*There may be some variation in weight.
■MCI Features Compared to steel shafts, carbon shafts have a disadvantage of having the center of gravity closer to the grip, which impairs the feel. The development of Metal Composite Technology (MCT) has made it possible to adjust the shaft's center of gravity while achieving the high controllability of the "smooth movement" that is a feature of carbon shafts.
|
|
■Compared to conventional carbon irons ・Swing weight can be made to the same level as steel shafts ・Reshafting from steel shafts is easy ・Smooth outer diameter distribution and EI distribution due to a design that uniforms the carbon thickness over the entire length ・Perfect frequency flow and torque flow design for a club feel |
|
■Compared to steel shafts -High hardness in both torsion and bending -Taking advantage of the high degree of design freedom, the EI at the grip side is increased, making it easier to hit, and resulting in a more flexible design -With vibration control performance that is more than twice that of steel, the burden on the body is reduced and the comfort of hitting is improved. |
|
■Others ・The MC80, 100, and 120 irons are made with a metal tube, achieving a swing weight equivalent to that of a steel shaft. ・The MC60 iron is made with a metal foil laminate, optimizing the tip mass. ・The metal tube composite technology has been patented (Patent No. 4880063). ・Patent pending for metal foil composite technology (patent application no. 2012-95194) |
model | flex | Product Manager | Weight (product) | torque | Tip diameter | Butt diameter | condition |
MCI50 | R | 39.0 to 35.5 |
55.0 |
3.5–3.3 | 9.35 | 14.9 | First and Second |
S |
57.0 |
15.0 |
MCI60 | R | 39.0 to 35.5 |
65.0 |
3.2–2.8 | 9.35 | 15.1 | First and Second |
S |
67.0 |
15.2 |
MCI70 | R | 39.0 to 35.5 |
73.0 |
3.0–2.6 | 9.35 | 15.1 | First and Second |
S |
75.0 |
15.2 |
MCI80 | R | 39.0 to 35.5 |
84.0 |
2.9–2.5 | 9.35 | 15.0 | During ~ |
S |
86.0 |
15.1 |
model | flex | Product Manager | Weight (product) | torque | Tip diameter | Butt diameter | condition |
MCI 90 | R | 39.0 to 35.5 | 92.0 | 2.8 to 2.4 | 9.35 | 15.1 | During ~ |
S | 94.0 | 15.2 |
MCI 100 | S |
104.0 |
2.8 to 2.4 | 15.1 |
X |
106.0 |
15.2 |
MCI 110 | S | 113.0 | 2.6–2.2 | 15.1 |
X | 115.0 | 15.2 |