|
Miura Giken CB-302 Glamorous Cavity Iron
|
| This one-piece cavity head is made by soft iron forging, and features a glamorous cavity shape that challenges the limits of the forging process. |
| Although it has a shape with a strong sense of volume, it achieves a high level of both forgiveness and operability through effective weight distribution within the cavity for each count and a sole design that allows for easy release. |
| Introducing the CB-302, a head that can be used to the fullest by everyone from average golfers to advanced golfers. |
The cavity is V-shaped, centered directly behind the impact area, and the weight is effectively distributed between the toe and heel, taking into consideration the functionality required for each count.
The head shape allows the entire head weight (=power) to be transmitted to the ball without loss during impact. The 160g weight (#7: blue part in the image above), which is 60% of the total weight of the head, is distributed to the extremely deep cavity sole. This is an increase of 1Og compared to the sole weight of the CB-301, achieving an even lower center of gravity.
Although the launch angle is high, the well-thought-out cavity shape allows for a strong ball trajectory that resists wind.
The sole width (#7: head center part) exceeds that of CB-301, achieving 19.8mm, the largest in the history of MG irons for an integrated soft iron forged head, and providing tolerance against head entry errors.
To address the problem of head slippage, which is a concern with wide sole heads, we have adopted a camber sole with a rounded back face side, providing a firm bounce effect while pursuing good slippage.
It is less affected by the grass and lie conditions and allows you to swing comfortably.
The sole shape has wide adaptability to swing trajectory and head incidence angle, and can accommodate golfers with a wide range of swing types.
The face length is 2mm shorter than CB-301 to 71.5mm. And the heel height is 1mm higher, to 34mm. It is a head that can be used by a wide range of target groups, as it has a small size and good operability, while achieving high straightness with little left and right ball wobbling.
The address view has a rounded overall outline, while the blade part has a strong and voluminous impression, similar to the back face.
The moderate offset, the volume of the heel, and the beautiful connection of the surfaces that wrap around the ball create a sense of unity throughout the club, creating an exquisite sense of calm and gentleness at address.
We have optimized the weight distribution on the back face to match the performance required for each count.
The weight on the toe side and heel side is changed depending on the count, starting from the V-shaped top of the sole.
The long iron has a weight distribution that makes it easy to turn the head and makes it difficult for the ball to go out to the right, while the short iron has a weight distribution that makes it easy to control the trajectory of the ball without getting caught too far to the left even if it goes down firmly. It has become.
We actively use the weight, which accounts for 60% of the entire head, to achieve the required performance.
Price: ¥25,000+tax (¥27,500 tax included)/1 piece
*We cannot sell the head alone.
*Weight may vary slightly
The much talked about MID designed at the request of US Tour players has finally arrived in Japan!!
(Dynamic Gold MID Series) |
The latest shaft, the Dynamic Gold MID TOUR ISSUE, which has begun supplying to the 2022 PGA Tour, features a new design that matches the trend of low spin designs.
Compared to the regular Dynamic Gold, the Dynamic Gold MID TOUR ISSUE has an increased launch angle and spin while maintaining a 130g tour weight and unique feel. It performs well even in the tough settings of the PGA Tour, and has already contributed to three wins in the 2022 season since its debut.
In order to allow more golfers to experience the performance of the MID, the mid-weight 115 was also released at the same time. With the same performance as the 130g TOUR ISSUE, it matches the latest golf balls and clubs, making it a very attractive product for many golfers.
-New shaft from the Dynamic Gold brand.
- Adopts a new design that matches the trend for low spin designs - Increased launch angle and spin compared to regular Dynamic Gold.
- Maintains the weight of Dynamic Gold, which is popular among tour players.
- Stiffer mid-section, softer tip design - Increased launch angle and spin while maintaining the DG feel.
| Product Specifications Dynamic Gold MID TOUR ISSUE |
| Product code | flex | full length | Tip diameter | Butt diameter | Weight before cutting | Kick point |
| DGMID130TI | X100 | 40.5-37.0 inches (1,029-940 mm) | .355 inches (9.00 mm) | .600 inches (15.25 mm) | 130g | Mid-tone |
| S200 |
*The weight tolerance of DG MID TOUR ISSUE is the same as that of general steel shafts.
