|
Miura Giken CB-302 Glamorous Cavity Iron
|
| This one-piece cavity head is made by soft iron forging, and features a glamorous cavity shape that challenges the limits of the forging process. |
| Although it has a shape with a strong sense of volume, it achieves a high level of both forgiveness and operability through effective weight distribution within the cavity for each count and a sole design that allows for easy release. |
| Introducing the CB-302, a head that can be used to the fullest by everyone from average golfers to advanced golfers. |
The cavity is V-shaped, centered directly behind the impact area, and the weight is effectively distributed between the toe and heel, taking into consideration the functionality required for each count.
The head shape allows the entire head weight (=power) to be transmitted to the ball without loss during impact. The 160g weight (#7: blue part in the image above), which is 60% of the total weight of the head, is distributed to the extremely deep cavity sole. This is an increase of 1Og compared to the sole weight of the CB-301, achieving an even lower center of gravity.
Although the launch angle is high, the well-thought-out cavity shape allows for a strong ball trajectory that resists wind.
The sole width (#7: head center part) exceeds that of CB-301, achieving 19.8mm, the largest in the history of MG irons for an integrated soft iron forged head, and providing tolerance against head entry errors.
To address the problem of head slippage, which is a concern with wide sole heads, we have adopted a camber sole with a rounded back face side, providing a firm bounce effect while pursuing good slippage.
It is less affected by the grass and lie conditions and allows you to swing comfortably.
The sole shape has wide adaptability to swing trajectory and head incidence angle, and can accommodate golfers with a wide range of swing types.
The face length is 2mm shorter than CB-301 to 71.5mm. And the heel height is 1mm higher, to 34mm. It is a head that can be used by a wide range of target groups, as it has a small size and good operability, while achieving high straightness with little left and right ball wobbling.
The address view has a rounded overall outline, while the blade part has a strong and voluminous impression, similar to the back face.
The moderate offset, the volume of the heel, and the beautiful connection of the surfaces that wrap around the ball create a sense of unity throughout the club, creating an exquisite sense of calm and gentleness at address.
We have optimized the weight distribution on the back face to match the performance required for each count.
The weight on the toe side and heel side is changed depending on the count, starting from the V-shaped top of the sole.
The long iron has a weight distribution that makes it easy to turn the head and makes it difficult for the ball to go out to the right, while the short iron has a weight distribution that makes it easy to control the trajectory of the ball without getting caught too far to the left even if it goes down firmly. It has become.
We actively use the weight, which accounts for 60% of the entire head, to achieve the required performance.
Price: ¥25,000+tax (¥27,500 tax included)/1 piece
*We cannot sell the head alone.
*Weight may vary slightly
Sold exclusively by authorized dealers. Adds tolerance to the J series, which is popular worldwide.
[h-PLUS Series]
The h-PLUS features a "Flight Control" design that provides higher launch and better responsiveness without sacrificing performance. The progressive tip design provides higher ball flight while providing lightweight control for accuracy and distance.
[h-TOUR Series]
A new line extension to the popular j-Series, the h-TOUR features a slightly longer parallel length that is more optimized for all golfers and is more forgiving than the US LPGA Tour-proven j-Series.
Only authorized dealers recognized by True Temper are allowed to handle this product.
Steel fiber H series.
By setting the tip parallel length of the J series, which has a proven track record in professional tours around the world,
This is a highly tolerant model.
By installing flight control design,
It combines high trajectory and outstanding feeling while maintaining maximum performance.
|
Steel fiber used by professionals
Snedegar , Matt Kuchar , Couples , Tim Clark, and others who have been outstanding at the Masters every year.
On the LPGA, Lydia Ko and Nelly Korda
Its popularity is soaring around the world that even professional golfers such as Arnold Palmer and Jumbo Ozaki have switched to this shaft.
What's important is that not only top professionals but also Daiichi Golf's customers have started to use Steel Fiber more and more.
A magnetic carbon shaft!?
Amazingly, even though this shaft is carbon, a magnet can be attached to it!
That's because the steel fiber shaft is made of extremely fine steel fibers wrapped around a carbon shaft!
Approximately 94 km of steel fiber is wrapped around one shaft.
An innovative product that combines steel and carbon fiber.
Its snappy feel and amazing direction have captured the attention of golfers around the world!
Why is steel and carbon a good combination?
|
| Each of the four previous shafts had obvious disadvantages. |
| Steel shaft |
Lightweight Steel
〇 Greater flight distance
× Low stickiness, difficult to turn |
Heavy Steel
〇If the weight is soft, it is easy to swing and hits the center.
× Lack of distance
|
|
| Carbon shaft |
Lightweight Steel
〇 Maximum flight distance
× The shaft has no presence,
Difficult to get the timing right |
Heavy Steel
〇Easy to take back
× The head is hard to turn and the distance is not great.
|
|
Oh my God!
For the steel fiber that suits you
I can't see any weaknesses .
On the contrary, how pleasant is it to hit with a new feeling? !
I don't think Daiichi Golf's staff are the only ones who feel like they've seen America's potential.
A technique woven together using modern technology.
Steel fiber is in the core of the carbon shaft,
1/10th the width of a human hair
It is made by wrapping bundles of steel-like fibers of about 8 microns in size.
This is a product that can only be made with today's high technology!
| Therefore, steel fiber is... |
| The shaft itself is resistant to crushing, so even though it snaps, the direction is stable! |
It's easy to hit controlled shots, which are difficult with carbon shafts, and you won't lose even when hitting from the rough! |
Even though it is a lightweight type, it has a strong presence, which stabilizes the swing plane and leads to a successful take-back and change of direction! |
Ease of use, that is , "direction" and outstanding "distance"
These two elements that were thought to be contradictory
You can learn this at the same time with steel fiber!
Can be used by professionals and advanced users ,
This shaft is easy to handle even for those who are not good at irons !
|
Correspondence table by head speed
Daiichi Golf Original!
Our experienced staff will use their experience to
Made with golfers in mind!
