|
Miura Giken CB-302 Glamorous Cavity Iron
|
| This one-piece cavity head is made by soft iron forging, and features a glamorous cavity shape that challenges the limits of the forging process. |
| Although it has a shape with a strong sense of volume, it achieves a high level of both forgiveness and operability through effective weight distribution within the cavity for each count and a sole design that allows for easy release. |
| Introducing the CB-302, a head that can be used to the fullest by everyone from average golfers to advanced golfers. |
The cavity is V-shaped, centered directly behind the impact area, and the weight is effectively distributed between the toe and heel, taking into consideration the functionality required for each count.
The head shape allows the entire head weight (=power) to be transmitted to the ball without loss during impact. The 160g weight (#7: blue part in the image above), which is 60% of the total weight of the head, is distributed to the extremely deep cavity sole. This is an increase of 1Og compared to the sole weight of the CB-301, achieving an even lower center of gravity.
Although the launch angle is high, the well-thought-out cavity shape allows for a strong ball trajectory that resists wind.
The sole width (#7: head center part) exceeds that of CB-301, achieving 19.8mm, the largest in the history of MG irons for an integrated soft iron forged head, and providing tolerance against head entry errors.
To address the problem of head slippage, which is a concern with wide sole heads, we have adopted a camber sole with a rounded back face side, providing a firm bounce effect while pursuing good slippage.
It is less affected by the grass and lie conditions and allows you to swing comfortably.
The sole shape has wide adaptability to swing trajectory and head incidence angle, and can accommodate golfers with a wide range of swing types.
The face length is 2mm shorter than CB-301 to 71.5mm. And the heel height is 1mm higher, to 34mm. It is a head that can be used by a wide range of target groups, as it has a small size and good operability, while achieving high straightness with little left and right ball wobbling.
The address view has a rounded overall outline, while the blade part has a strong and voluminous impression, similar to the back face.
The moderate offset, the volume of the heel, and the beautiful connection of the surfaces that wrap around the ball create a sense of unity throughout the club, creating an exquisite sense of calm and gentleness at address.
We have optimized the weight distribution on the back face to match the performance required for each count.
The weight on the toe side and heel side is changed depending on the count, starting from the V-shaped top of the sole.
The long iron has a weight distribution that makes it easy to turn the head and makes it difficult for the ball to go out to the right, while the short iron has a weight distribution that makes it easy to control the trajectory of the ball without getting caught too far to the left even if it goes down firmly. It has become.
We actively use the weight, which accounts for 60% of the entire head, to achieve the required performance.
Price: ¥25,000+tax (¥27,500 tax included)/1 piece
*We cannot sell the head alone.
*Weight may vary slightly
As the world's lightest, it offers a new dimension of flight and maneuverability.
Feel, direction, distance. For all golfers who are committed to steel shafts.
After more than two years of development, unique new materials and new technologies have produced the long-awaited lightest steel in the world.
ZELOS 7 uses a completely new high-strength material, "NZNS60," which exceeds the patented material used in conventional NSPRO steel shafts. It brings a new hitting feel with the resilience and bounce that is unique to high carbon types.
At the same time, it has increased strength while maintaining flexibility, overturning the notion that "lightweight steel is not strong." This is a new genre of steel shaft that brings together the results of more than two years of continuous efforts to create an ultra-lightweight shaft.
Compared to the 750GH, the flex in the grip and middle is greater. The gradual stiffness distribution allows for a smoother swing.
ZELOS 7 achieves unprecedented lightness and swing comfort compared to the NSPRO 750GH, which is characterized by the stability of a steel shaft. In other words, even though it is a tip-heavy shaft, it flexes smoothly from the tip to the grip, and the gradual stiffness distribution allows you to feel sufficient flex. In addition to being the lightest in the world, it also allows for an easier and smoother swing than ever before. 
| flex | length | weight | torque | condition | Shaft butt diameter |
| NSZELOS7 R2 | 37.5–35.0 | 73.5 | 2.9 | Destination | 14.5 |
| NSZELOS7R | 37.5–35.0 | 74.0 | 2.8 | Destination | 14.5 |
| NSZELOS7 S | 37.5–35.0 | 77.5 | 2.6 | Destination | 14.5 |
 |
Comment from Manager Nakagawa of Minoh store:
It's a steel shaft in the 70g range, and it's as close to a carbon shaft as you can get!
It's very soft so it's generally easy to swing, but it's quite squishy...
It also runs smoothly through the impact zone! It has a great tip action, as you would expect. Normally, when something is this soft, it has less bounce and can easily become droney, but it really bounces like carbon and gives you a crisp feeling.
You might think that it would be better to use carbon instead, but this has the advantage that it suppresses the reverse bending that is unique to carbon, making it less likely to go left.
Carbon may fly well, but for those who are worried that it flies too far or breaks apart, this is recommended especially for senior and female athlete golfers.
It seems like it picks up the ball quickly, so it's easy to get the ball up. |
