Miura Giken CB-302 Glamorous Cavity Iron

This one-piece cavity head is made by soft iron forging, and features a glamorous cavity shape that challenges the limits of the forging process.

Although it has a shape with a strong sense of volume, it achieves a high level of both forgiveness and operability through effective weight distribution within the cavity for each count and a sole design that allows for easy release.

Introducing the CB-302, a head that can be used to the fullest by everyone from average golfers to advanced golfers.

CONCEPTS

The cavity is V-shaped, centered directly behind the impact area, and the weight is effectively distributed between the toe and heel, taking into consideration the functionality required for each count.
The head shape allows the entire head weight (=power) to be transmitted to the ball without loss during impact. The 160g weight (#7: blue part in the image above), which is 60% of the total weight of the head, is distributed to the extremely deep cavity sole. This is an increase of 1Og compared to the sole weight of the CB-301, achieving an even lower center of gravity.
Although the launch angle is high, the well-thought-out cavity shape allows for a strong ball trajectory that resists wind.



The sole width (#7: head center part) exceeds that of CB-301, achieving 19.8mm, the largest in the history of MG irons for an integrated soft iron forged head, and providing tolerance against head entry errors.
To address the problem of head slippage, which is a concern with wide sole heads, we have adopted a camber sole with a rounded back face side, providing a firm bounce effect while pursuing good slippage.
It is less affected by the grass and lie conditions and allows you to swing comfortably.
The sole shape has wide adaptability to swing trajectory and head incidence angle, and can accommodate golfers with a wide range of swing types.



The face length is 2mm shorter than CB-301 to 71.5mm. And the heel height is 1mm higher, to 34mm. It is a head that can be used by a wide range of target groups, as it has a small size and good operability, while achieving high straightness with little left and right ball wobbling.
The address view has a rounded overall outline, while the blade part has a strong and voluminous impression, similar to the back face.
The moderate offset, the volume of the heel, and the beautiful connection of the surfaces that wrap around the ball create a sense of unity throughout the club, creating an exquisite sense of calm and gentleness at address.



We have optimized the weight distribution on the back face to match the performance required for each count.
The weight on the toe side and heel side is changed depending on the count, starting from the V-shaped top of the sole.
The long iron has a weight distribution that makes it easy to turn the head and makes it difficult for the ball to go out to the right, while the short iron has a weight distribution that makes it easy to control the trajectory of the ball without getting caught too far to the left even if it goes down firmly. It has become.
We actively use the weight, which accounts for 60% of the entire head, to achieve the required performance.

spec

Price: ¥25,000+tax (¥27,500 tax included)/1 piece

*We cannot sell the head alone.
*Weight may vary slightly




The latest heat treatment technology for the best feeling!

This newly adopted heat treatment technology, called MHT (Multi Heat Treatment) technology, allows for flexible control of the material hardness of all areas of the shaft, from the tip to the grip.

With our unparalleled, revolutionary know-how, we have achieved the optimal feeling necessary and sufficient for heavy-duty steel shafts.

Its unprecedented, exquisite stickiness has earned it high praise from tour professionals, and it provides the control and feel that meets the advanced needs of advanced players.


The increased head speed and optimized launch angle increase the ball's maximum reach. Its excellent straightness makes it difficult for the ball to lose speed, and ensures an increased carry.

●Unique thickness adjustment technology for best performance.
NSPRO's unique thickness adjustment technology, developed through the production of steel shafts that continue to be highly acclaimed around the world, is utilized. With unrivaled precision, the thickness of every area of ​​the shaft can be freely adjusted in micro units, completely overturning the notion that "steel shafts have no design freedom." By providing the ideal launch angle and spin rate for each individual player, it enables the best performance that advanced players continue to pursue.

●Ideal launch angle and spin amount to conquer tough courses.
The results of these two technologies, the latest heat treatment and unique thickness adjustment, are truly "on par with and surpassing our rivals."
While maintaining the tough feeling of the shaft you are familiar with, the added delicacy gives you greater distance and control, enhancing your challenging mindset on difficult courses.


NSPRO MODUS3 SYSTEM3 TOUR 125

product name	flex	Weight (g)	Balance Point	torque	kick point
NSPRO MODUS3 SYSTEM3 TOUR 125	R	127.5	51.5	1.8～1.6	Original
	S	128.5	51.5	1.6–1.4	Original
	X	129.5	51.5	1.5–1.3	Original