Kamui
TP-XI eleven nitrogen driver |
| Nitrogen gas filled DUAL STRUCTURE head |
DUAL STRUCTURE By creating an internal wall at the rear of the dual-structure face, the crown and sole are connected, creating a Nitrogen-loaded box. This box significantly increases the horizontal and vertical rigidity of the front of the head, thereby increasing the head's resistance to twisting on off-center hits. This keeps the face square to the swing trajectory, resulting in the same forgiveness as a high MOI head, where the ball's spin axis is less likely to tilt.
In addition, the increased rigidity of the front of the head due to the internal wall structure firmly receives the mass of the ball like a rigid trampoline frame, providing optimal deflection to the face, while the internal wall located close to the face creates high repulsion performance that instantly transfers impact energy to the ball. The DUAL STRUCTURE achieves both high ball speed and forgiveness, which are usually in a trade-off relationship.
Nitrogen gas-loaded head Nitrogen gas-loaded head By loading Nitrogen gas-loaded inside the head, the pressure inside the head is increased, and even if the bendable beta-type titanium, DAT55G, is thinned, unnecessary bending is suppressed, and the CT value is kept within the appropriate range at a high level, and durability is improved. The repulsion of Nitrogen minimizes the deceleration of the head after impact, minimizing the increase in ball speed on center hits and the decrease in ball speed on off-center hits, resulting in a head that can withstand the mass of the ball. (Proven 24% improvement in head deceleration)
Traditional head shape that is visually easy to set upThe peaks of the radii of the face bulge, the top line of the crown, and the back sole line are aligned in a straight line in the direction of the ball flight.The traditional head shape, which takes into consideration the symmetry of the face, body, and toe-heel, makes it visually easy to set up and pull straight, creating a positive cycle for your swing.
The BOX structure gives this shallow, low center of gravity, low MOI head the same forgiveness as a high MOI head, giving it a traditional look that high MOI heads don't have, and the head is highly maneuverable and easy to swing.The ease of swinging and rigidity make it less likely to bend, leading to even greater head speed.
Kamui
TP-XI eleven nitrogen driver specifications |
The strongest playing style has evolved even further
|
This is the world's first application of ultra-high modulus 90t carbon to the entire length of a golf shaft.
By suppressing shaking during the swing, it becomes much easier to swing, and by reducing impact loss, it gives you an unprecedented feeling of release.
Ultra-high elastic carbon fiber "90t carbon" By layering the world's hardest material, 90t carbon, we have achieved maximum acceleration and impact strength.
By suppressing shaking during the swing, it becomes much easier to swing, and by reducing impact loss, it gives you an unprecedented feeling of release.
Toray's cutting-edge carbon fiber "TORAYCA M40X" exceeds T1100G
Full-length laminate, just like the DAYTONA SPEEDER.
By pursuing both fiber strength and elastic modulus, which are in a trade-off relationship, to the limit, we have achieved an approximately 30% increase in strength while maintaining the same elastic modulus as conventional carbon fibers.
It produces a superior playing feel and feeling.
Ultra-low resin carbon sheet "RC15% prepreg" 40g/50g/60g
A carbon sheet with an ultra-low resin content of "RC15%", which has been further reduced to the bare minimum from RC20%, is laminated.
By reducing the amount of resin, the ratio of carbon fiber is increased, resulting in a dense shaft.
Wasted movement is eliminated, resulting in stronger spring back.
