Kamui TP-XI eleven nitrogen driver |
Nitrogen gas filled DUAL STRUCTURE head |
DUAL STRUCTURE By creating an internal wall at the rear of the dual-structure face, the crown and sole are connected, creating a Nitrogen-loaded box. This box significantly increases the horizontal and vertical rigidity of the front of the head, thereby increasing the head's resistance to twisting on off-center hits. This keeps the face square to the swing trajectory, resulting in the same forgiveness as a high MOI head, where the ball's spin axis is less likely to tilt.
In addition, the increased rigidity of the front of the head due to the internal wall structure firmly receives the mass of the ball like a rigid trampoline frame, providing optimal deflection to the face, while the internal wall located close to the face creates high repulsion performance that instantly transfers impact energy to the ball. The DUAL STRUCTURE achieves both high ball speed and forgiveness, which are usually in a trade-off relationship.
Nitrogen gas-loaded head Nitrogen gas-loaded head By loading Nitrogen gas-loaded inside the head, the pressure inside the head is increased, and even if the bendable beta-type titanium, DAT55G, is thinned, unnecessary bending is suppressed, and the CT value is kept within the appropriate range at a high level, and durability is improved. The repulsion of Nitrogen minimizes the deceleration of the head after impact, minimizing the increase in ball speed on center hits and the decrease in ball speed on off-center hits, resulting in a head that can withstand the mass of the ball. (Proven 24% improvement in head deceleration)
Traditional head shape that is visually easy to set upThe peaks of the radii of the face bulge, the top line of the crown, and the back sole line are aligned in a straight line in the direction of the ball flight.The traditional head shape, which takes into consideration the symmetry of the face, body, and toe-heel, makes it visually easy to set up and pull straight, creating a positive cycle for your swing.
The BOX structure gives this shallow, low center of gravity, low MOI head the same forgiveness as a high MOI head, giving it a traditional look that high MOI heads don't have, and the head is highly maneuverable and easy to swing.The ease of swinging and rigidity make it less likely to bend, leading to even greater head speed.
Kamui TP-XI eleven nitrogen driver specifications |
"Flys and doesn't bend"
DIAMANA PD
Thorough pursuit of "flying straight" |
With the goal of achieving both stability and distance, we pursue distance performance through "advanced materials and development technology."
Based on the latest club trends, this design aims to achieve maximum distance while also achieving a smooth swing and stable shaft behavior at impact.
By increasing the rigidity of the tip, it helps to reduce the variation in impact points experienced by amateur golfers.
Diamana™ is an unprecedented new design that combines smooth swing and tip rigidity as strong as a diamond.
The design is IP-finished to evoke the sparkle of diamonds, creating a luxurious and chic cosmetic look.
By optimizing the composition of the matrix resin, a strong cross-linked structure is created. The physical properties of the molded product are: Strength 14%, Elasticity 15%, Elongation at break 8%* New matrix technology that improves #371 resin was developed by taking advantage of our advantage of being able to manufacture and develop from raw materials, and it maximizes the potential of MR70.
|
Mitsubishi Chemical's high-performance carbon fiber has been developed by reviewing the manufacturing process and achieving both elastic modulus and strength, which was previously difficult to achieve. Compared to our previous products, this fiber has an elastic modulus of approximately 10% and strength of approximately 20%.
|
We use boron fiber, which is strong and has a high reinforcing effect, and is also used in aerospace applications where strict physical properties are required.
|
DIAMANA PD Specifications
|
Shaft price: ¥40,000 (excluding tax)