Kamui
TP-XI eleven nitrogen driver |
| Nitrogen gas filled DUAL STRUCTURE head |
DUAL STRUCTURE By creating an internal wall at the rear of the dual-structure face, the crown and sole are connected, creating a Nitrogen-loaded box. This box significantly increases the horizontal and vertical rigidity of the front of the head, thereby increasing the head's resistance to twisting on off-center hits. This keeps the face square to the swing trajectory, resulting in the same forgiveness as a high MOI head, where the ball's spin axis is less likely to tilt.
In addition, the increased rigidity of the front of the head due to the internal wall structure firmly receives the mass of the ball like a rigid trampoline frame, providing optimal deflection to the face, while the internal wall located close to the face creates high repulsion performance that instantly transfers impact energy to the ball. The DUAL STRUCTURE achieves both high ball speed and forgiveness, which are usually in a trade-off relationship.
Nitrogen gas-loaded head Nitrogen gas-loaded head By loading Nitrogen gas-loaded inside the head, the pressure inside the head is increased, and even if the bendable beta-type titanium, DAT55G, is thinned, unnecessary bending is suppressed, and the CT value is kept within the appropriate range at a high level, and durability is improved. The repulsion of Nitrogen minimizes the deceleration of the head after impact, minimizing the increase in ball speed on center hits and the decrease in ball speed on off-center hits, resulting in a head that can withstand the mass of the ball. (Proven 24% improvement in head deceleration)
Traditional head shape that is visually easy to set upThe peaks of the radii of the face bulge, the top line of the crown, and the back sole line are aligned in a straight line in the direction of the ball flight.The traditional head shape, which takes into consideration the symmetry of the face, body, and toe-heel, makes it visually easy to set up and pull straight, creating a positive cycle for your swing.
The BOX structure gives this shallow, low center of gravity, low MOI head the same forgiveness as a high MOI head, giving it a traditional look that high MOI heads don't have, and the head is highly maneuverable and easy to swing.The ease of swinging and rigidity make it less likely to bend, leading to even greater head speed.
Kamui
TP-XI eleven nitrogen driver specifications |
CRAZY brings you this masterpiece, made from high-elasticity 90t full-length carbon, the best product in CRAZY's history.
Guiding your swing... The ultimate in high-trajectory power with all the charm of Crazy.
The shaft follows the swing plane to the maximum extent possible, running from the top to the finish in one go.
Being able to "swing comfortably" dramatically improves distance and direction.
The unprecedented high trajectory, low spin, and wind-resistant ball quality produces big carry.
Experience greater distance, direction, and the ball's "slow, long flight" effect than ever before. |
CRAZY 9 Pt
Heavy type "Strong tenacity"
| flex |
Weight (±3g) |
torque |
Tip (mm) |
length |
kick point |
| S |
68 |
3.3 |
8.5 |
46 |
Mid-tone |
| SX |
69 |
3.3 |
8.5 |
46 |
Mid-tone |
| X |
71 |
3.3 |
8.5 |
46 |
Mid-tone |
*Notes regarding 90t Shaft
CRAZY-9 is designed and manufactured using a combination of Hi Carbon sheets such as 40t, 46t, and 90t.
Compared to conventional products, this product uses a lot of thin fibers (sheets) with a high elasticity, so please be careful about heating and the number of times you heat it when replacing the shaft.
*Made in Japan
Price: 120,000 yen (excluding tax) per bottle
