430cc that doesn't go left.
Reduced air resistance for increased flight distance! |
Vaccine Compo
WACCINE COMPO
WAC LS-01 Driver
Reduced air resistance increases H/S by 5.4%! Small 430cc and flow surface structure
20% spin reduction! Shallow center of gravity, deep face design Face height/60 Center of gravity height/35
Center of gravity distance/40 Center of gravity depth/30 Center of gravity angle/26
Achieves weight distribution that suppresses head return! Carbon crown + vacuum precision casting
Play hard with WACTITAN! Face material is WACTITAN (forged DAT55)
The loft adjustment function of the sleeve allows for optimal trajectory.
Vaccine Compo
WAC LS-01 Driver |
| loft angle |
10 (standard position) |
| lie angle |
60.5 (same as above) |
| Face Angle |
0 (same as above) |
| volume |
430cc |
| Head Weight |
196g (including sleeve 7g + weight screw 6g) |
| Face Thickness |
2.9mm |
| Face Material |
Forged DAT55 |
| Body Material |
Carbon crown + vacuum precision casting 6-4TI |
| Sleeve Material |
SUS630 |
| accessories |
Head Cover |
| Head unit price |
¥68,000 (¥74,800 including tax) |
| Sold separately |
Weight screw 2g/4g/8g/10g/12g ¥1,500 (¥1,650 including tax)
Screwdriver ¥2,400 (¥2,640 including tax)
Sleeve ¥2,000 (¥2,200 including tax)
Sleeve installation screw ¥500 (¥550 including tax) |
The speed shaft that inherited the original FE and RB, enters the third generation of the series!
FireExpress RR-B Fire Express is one of the first to use cutting-edge materials and continues to create shafts that increase speed and hit rate with groundbreaking designs and also have a comfortable swing. Their speed shafts have finally evolved into the third generation.
The Fire Express RR-B uses many TORAYCAR series materials such as T1100G, M50J, M40S, M30S, and TORAYCAR M40X, the most advanced material indispensable for premium shafts. The latest design increases the high elasticity ratio in the lamination, and effectively arranges multi-axis woven fabric sheets such as six-axis and four-axis, as well as tungsten powder sheets, making it easier to swing and contributing to increased distance and improved directionality.
By analyzing the material properties of the TORAYCAR series, we have succeeded in increasing rigidity while reducing the weight at each weight range. The outer layer is wrapped with a six-axis woven fabric sheet along the entire length, and the grip part is further wrapped with a four-axis woven fabric for a ten-axis structure. It effectively creates a pause from the turn and increases speed.
The middle section has a six-axis woven fabric sheet, creating a double six-axis structure. This controls the shaft trajectory during the swing and ensures accurate impact.
Furthermore, a tungsten powder sheet is attached from the middle to the tip. By controlling the center of gravity, it promotes ease of swing and acceleration of the tip. The optimal weight distribution based on the scientific study of swing trajectory and shaft flex return allows you to run through the impact at high speed.
The weight range is 4 types, including the 40g "Special" with 1 flex after testing, the 50 and 60g TX (Tour X) lineup, and the 70g range that has a strong following. The exterior is blue on the grip side to evoke a sense of speed, silver in the middle, and a clear coating on the tip that allows you to see the woven fabric.
・Made in Japan
-Chip parallel length is 50mm.
・The vibration frequency is an estimate when assembled with a head of 198g and 45.75 inches (measured using the 60-degree method).
-For adjustable clubs, the numbers may change significantly due to factors such as the shallow insertion of the hosel.
・The tip diameter is the bare tube value before painting.
Price: ¥58,000 (excluding tax) / 1 bottle
