Play. Design. The birth of captivating gear.

Attractive iron

It combines the maneuverability and ease of use that are characteristic of muscle backs, and produces trajectories that impress intermediate and advanced players. In addition, the sophisticated multi-faceted cuts made by CNC machining are sure to captivate anyone who sees it.
The birth of "eye-catching" gear

Captivating in every situation



In addition to the excellent feel that comes from the one-piece soft iron forged structure, the #7 has a 34° loft design.

This iron prevents the ball from flying too far and is easy to aim for when the ball is difficult to hit. It supports impressive play.

Added ease of use to the operability of the muscle


The head size was carefully designed to ensure ease of use. Through repeated trial and error, we achieved a balance between ease of use and maneuverability that was not possible with conventional muscle backs.
With an optimal center of gravity distance and a wide sweet spot, it is resistant to off-center hits.

Multi-faceted cut for a captivating shine




A sophisticated back face design created through CNC machining, allowing for high-precision adjustments in hundredths of a millimeter.
The multi-faceted cut changes its shine depending on the angle, and its appearance changes depending on the angle from which you view it, resulting in a simple yet luxurious finish that will never get boring.

spec



Dynamic Gold EX Tour Issue
New "Weight Lock" technology provides the same performance for all players

Previously, Tour Issue irons were roughly divided into three groups based on the weight of each individual iron, and were selected so that the tolerance between sets within each group was within the regulations. However, even if the same S200 Tour Issue set was used, there was actually a slight weight difference when comparing sets from different groups. In other words, the weight tolerance between the iron sets I own is the same, but the basic weight is different when comparing your Tour Issue irons to my Tour Issue irons.

The new "Weight Lock" technology, for which a patent is pending, has been developed to eliminate the weight tolerances between sets that arise due to individual differences.

"Weight Lock" technology is a technology that eliminates individual differences in manufacturing by attaching a special material weight inside the shaft according to the difference from the basic weight. Of course, it is attached in a place that does not affect the flex, kick point, or performance of the shaft itself. Dynamic Gold EX Tour Issue, which was one of the first to adopt this technology, achieves tighter weight tolerances on the manufacturing line and at the same time, by attaching a "weight lock", all shafts are finished as products with the same specification weight and tolerance. In other words, it means that it is a "Tour Player Weight Shaft" that provides the same performance to all players, regardless of whether they are professional or amateur.

	flex	Product Manager	Weight before cutting (g)	Butt diameter (mm)	Tip diameter (mm)	Kick Point
DGIS- WL-HTS2	S200	40.5-37.0 inches (1029-940mm)	131	15.25	9.00	Original condition

Suitable head speed: 46m/s~(X), 40~48m/s(S)

Application: Iron, Dip: Tapered

*There is a "weight lock" attached to the inside of the shaft, so please do not press the inside with a stick or anything else. This may damage the "weight lock."
*Please do not use solvents such as paint thinner to wipe the printed surface as this may cause the print to peel off. Please also note that the print may peel off depending on the usage conditions or over many years of use.