The time to worry about the left is over. Let's go!
[Specially-made custom clubs]
GINNICO Fairway Wood Composite Technofire HR FW Shaft
Item Number
ginnicofw-27
[
930
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
Quantity in stock
999
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
The time to worry about the left is over.
It minimizes mistakes on the left side, allowing you to hit the ball firmly and produce a stable, exciting trajectory.
Furthermore, it comes equipped with replaceable weights and adjustable sleeves, allowing you to adjust the center of gravity, loft angle, lie angle, and FA.
You're sure to find your own setting.
weight
The weight can be replaced in five positions.
You can customize the center of gravity position to your liking.
| Weight 1 |
Weight 2 |
Weight 3 |
Weight 4 |
Weight 5 |
| 1.2g |
1.2g |
5g |
5g |
3g |
sleeve
The use of an adjustable sleeve allows you to set the loft angle, lie angle, and FA to suit your swing and preferred trajectory. The loft angle can be adjusted by ±1.5°.
Also used in FW. Super-flying face
material
The face material is the same as the driver, made from the new Ti-HEG titanium.
The overwhelming distance and soft feel you've never experienced before.
Face Construction
With its exceptionally strong trajectory and straightness (we paid particular attention to this), you can hit it to the left without fear.
It gets you excited but doesn't get carried away (optimal spin). You can hit the ball without getting carried away, so you'll feel great.
| GINNICO Fairwaywood Specifications |
You can choose one of A, B, or C.
Matches with faster driver shafts!
The power tip structure reduces the opening and closing of the head, achieving a high launch angle. The adoption of a high-elasticity, high-strength sheet allows for faster driver shafts.
It has the same speed as the Fire Express series high-speed driver shaft "HR", but with a higher hit rate, and for the first time in the Fire Express series for FW, it uses "TORAYCAR T1100G" and "6-axis woven fabric sheet". It is lightweight but has higher overall rigidity, resulting in a sharp feeling with a sense of speed.
In addition, it uses a "power chip structure" with a tungsten powder sheet attached to the chip side.
Controls flex while suppressing toe down and head opening and closing.
It improves the hit rate, reduces loss on impact, and makes it easier to control the launch angle.
The lineup also includes 40g models that can be set up with driver shafts that are becoming lighter.
The exterior is clear on the handle side, silver in the middle, and black clear on the tip.
The six-axis woven fabric seat visible at the handle and tip creates a unique presence. In addition, the matte finish, a first for the Fire Express, gives it a fresh feel and enhances the premium feel.
Fire Express FW -HR technology-
| |
flex |
Product length (mm) |
weight |
torque |
Tip diameter (mm) |
Butt diameter (mm) |
condition |
Frequency |
| FW 4 |
F 2 (R) |
1105
(43.5 inches) |
48 |
5.5 |
8.50 |
15.00 |
First and Second |
234 |
| F1 (S) |
49 |
5.4 |
15.00 |
250 |
| FW 5 |
F3 (R) |
56 |
4.1 |
15.20 |
248 |
| F2 (S) |
58 |
4.0 |
15.30 |
264 |
| F1 (X) |
60 |
3.9 |
15.30 |
282 |
| FW 6 |
F2 (S) |
66 |
3.1 |
15.50 |
268 |
| F1 (X) |
68 |
3.0 |
15.60 |
286 |
■MADE IN JAPAN
■Chip parallel length is 75mm.
■The vibration frequency is an estimate when assembled at 42.5 inches (measured using the 60-degree method) with a head of 216g.
With adjustable clubs, the numbers can vary significantly depending on factors such as the shallow insertion of the hosel.
■The tip diameter is the bare tube value before painting.
Price: ¥45,000 (excluding tax) / 1 bottle
