manufacturer custom
[Manufacturer Custom]
Taylormade P790 Irons 2023
Graphite Design RAUNE Iron Shaft
Set of 5 (#6～Pw)
Authentic Japanese product
Item Number
23tmp790-15
List price
¥
165,000
at the place
¥
148,500
tax included
Member price available
[
1,350
Points awarded ]
You must be logged in to purchase at the member price.
-
-
-
-
-
-
-
-
Quantity in stock
989
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
Optimal center of gravity design for high performance The club-specific head design "FLTD CG Design" is used. By placing tungsten weights of different weights and shapes on each club, golfers can feel the "ease of flying" in the long irons, the "ease of aiming" in the middle irons, and the "ease of stopping" in the short irons, which are what many golfers are looking for, and this further improves forgiveness and stability.
"THICK-THIN back wall casting" makes it possible to further reduce weight Newly adopted is "THICK-THIN back wall casting". By making the back wall inside the face dimpled, we have succeeded in reducing the weight by making it thinner. The resulting excess weight is then redistributed by club to improve the moment of inertia and optimize the center of gravity. Each club delivers the performance required.
Premium sound and feel The lightweight and soft "SPEEDFORM? AIR filler" has succeeded in further improving the feeling and forgiveness without compromising the repulsive power of the thinner face. In addition, by incorporating a different "Sound Stabilization Bar" for each club, the feeling is further improved by the synergistic effect with the "SPEEDFORM? AIR filler".
Optimized Sweet Spot The "penetrating speed pocket" on the sole reduces unnecessary spin even on mishits on the lower part of the face, helping to maintain the initial velocity of the ball. In addition, the "chromoly steel L-shaped forged face" and "Progressive ICT" are used on the face. By optimizing the thickness distribution of the face surface for each club, the variation in trajectory is reduced even on off-center hits.
*Installed on the soles of irons 3 to 7
| HEAD | #3 | #Four | #Five | #6 | #7 | #8 | #9 | P.W. |
| Head material / Face material (manufacturing method) | Mild steel [8620] (cast) + built-in tungsten weight + SPEEDFOAM AIR? / Chromoly steel [4140] (forged) | Mild steel [8620] (cast) + SPEEDFOAM AIR / Chromoly steel [4140] (forged) |
| Loft angle (°) | 19 | twenty one | 23.5 | 26.5 | 30.5 | 35 | 40 | 45 |
| Lie angle (°) | 60.5 | 61 | 61.5 | 62 | 62.5 | 63 | 63.5 | 64 |
| Length (inches) | 39 | 38.5 | 38 | 37.5 | 37 | 36.5 | 36 | 35.75 |
| grip | TM Tour Velvet 360 Black (diameter 60/50g) |
*These specifications are calculated values and provisional values. Please note that they may be subject to change.
*Made in China/Taiwan/Vietnam
Long and middle shots have a high trajectory,
Short is control
The layering pattern varies for each club, and the long and middle irons are designed to be highly balanced, which naturally improves the swing and increases the flex and rebound of the mid-tip, improving the ball's launch.
The short irons are designed to allow you to control the ball while feeling the flex in your grip and suppressing the movement of the tip.
|
| RAUNE IRON i60 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | R/59
S/60 | R/59
S/60 | R/61
S/61 | R/62
S/63 | R/63
S/63 | R/64
S/64 | R/64
S/65 | R/65
S/65 |
| Torque (deg) | 4.5 | 4.5 | 4.4 | 4.3 | 4.1 | 4.0 | 4.0 | 3.8 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | R/14.80 S/14.85 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
| RAUNE IRON i75 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | R/71
S/72 | R/72
S/73 | R/74
S/74 | R/75
S/75 | R/75
S/76 | R/76
S/76 | R/77
S/77 | R/77
S/77 |
| Torque (deg) | 3.6 | 3.5 | 3.5 | 3.3 | 3.2 | 3.2 | 3.2 | 3.0 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | R/15.00 S/15.05 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
| RAUNE IRON i90 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | R/90
S/90 | R/90
S/90 | R/92
S/92 | R/93
S/93 | R/93
S/94 | R/94
S/94 | R/94
S/95 | R/95
S/96 |
| Torque (deg) | 3.3 | 3.3 | 3.2 | 3.1 | 3.1 | 2.8 | 2.7 | 2.6 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | R/15.20 S/15.25 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
| RAUNE IRON i105 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | S/108
X/109 | S/108
X/109 | S/110
X/110 | S/110
X/110 | S/112
X/113 | S/112
X/113 | S/12
X/114 | S/113
X/114 |
| Torque (deg) | 3.3 | 3.2 | 3.1 | 3.1 | 2.9 | 2.9 | 2.8 | 2.7 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | S/15.25X/15.30 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
