Optimal center of gravity design for high performance
The club-specific head design "FLTD CG Design" is used. By placing tungsten weights of different weights and shapes on each club, golfers can feel the "ease of flying" in the long irons, the "ease of aiming" in the middle irons, and the "ease of stopping" in the short irons, which are what many golfers are looking for, and this further improves forgiveness and stability.

"THICK-THIN back wall casting" makes it possible to further reduce weight
Newly adopted is "THICK-THIN back wall casting". By making the back wall inside the face dimpled, we have succeeded in reducing the weight by making it thinner. The resulting excess weight is then redistributed by club to improve the moment of inertia and optimize the center of gravity. Each club delivers the performance required.

Premium sound and feel
The lightweight and soft "SPEEDFORM? AIR filler" has succeeded in further improving the feeling and forgiveness without compromising the repulsive power of the thinner face. In addition, by incorporating a different "Sound Stabilization Bar" for each club, the feeling is further improved by the synergistic effect with the "SPEEDFORM? AIR filler".

Optimized Sweet Spot
The "penetrating speed pocket" on the sole reduces unnecessary spin even on mishits on the lower part of the face, helping to maintain the initial velocity of the ball. In addition, the "chromoly steel L-shaped forged face" and "Progressive ICT" are used on the face. By optimizing the thickness distribution of the face surface for each club, the variation in trajectory is reduced even on off-center hits.
*Installed on the soles of irons 3 to 7

HEAD	#3	#Four	#Five	#6	#7	#8	#9	P.W.
Head material / Face material (manufacturing method)	Mild steel [8620] (cast) + built-in tungsten weight + SPEEDFOAM AIR? / Chromoly steel [4140] (forged)					Mild steel [8620] (cast) + SPEEDFOAM AIR / Chromoly steel [4140] (forged)
Loft angle (°)	19	twenty one	23.5	26.5	30.5	35	40	45
Lie angle (°)	60.5	61	61.5	62	62.5	63	63.5	64
Length (inches)	39	38.5	38	37.5	37	36.5	36	35.75
grip	TM Tour Velvet 360 Black (diameter 60/50g)

*These specifications are calculated values ​​and provisional values. Please note that they may be subject to change.
*Made in China/Taiwan/Vietnam

PROJECT X

Project X calculates the optimal taper angle for each club to transfer more energy to the ball, so the taper angle varies for each club. This design performance has been proven by many PGA TOUR winners. This shaft has a regular flex that emphasizes control performance and is also heavy, making it ideal for hard hitters such as top amateurs as well as professionals.

flex	Shaft length	Tip Diameter	Butt Diameter	Weight after cutting	kick point
7.0(X+)	41.5-37.0 inches (1.054-940 mm)	.355 inch (9.00 mm)	.600 inches (15.25)	119g	Original condition
6.5(X)				115g
6.0(S+)				112g
5.5(S)				107g
5.0(R+)				105g

・Project X series is a product that is weight-controlled, but vibration frequency is not controlled.
Regarding weight, there is a tolerance of about plus or minus 4g around the values ​​stated in the specifications, fitting data, etc.

-Rifling structure: The internal rifling structure absorbs shaft vibrations, reducing strain on the body.

・Stepless: A type of shaft that has no steps.

-Weight control: The weight of each shaft is controlled within the tolerance range.

・Constant weight: All clubs are designed to be the same weight. Parallel weight varies depending on settings.