[Notes when ordering]
This product page is the selling price for one bottle.
Please enter the total number of items in the shopping cart.
(Example) Club number #5-PW (set of 6) ... [Quantity: 6]
(Example) Number #4 (1 piece)・・・【Quantity: 1】
■Estimated delivery date
Normal delivery time
| Approximately 14 days (if in stock) |
*Please note that the club length may change depending on the balance of the finished product.
Please note that orders cannot be canceled or changed after they have been placed.
*If the product is out of stock or sold out at the manufacturer, the product manager will contact you again by email.
Number of pieces can be selected
[Number of pieces can be selected - Daiichi Golf original]
PING G730 Iron Graphite Design RAUNE Iron Shaft
PING G730
Item Number
g730ir-25
List price
¥
42,350
at the place
¥
33,770
tax included
[
307
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Quantity in stock
998
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
| Head material/finish | Head material: 17-4 stainless steel (body) Finish: Hydro pearl chrome finish |
| count |
5I | 6I | 7I | 8I | 9I | P.W. | UW | 50 | 56 |
| Power Spec (Japanese standard) Loft angle (°) |
20 | twenty three | 26.5 | 30.5 | 35 | 40 | 45 | 50 | 56 |
| US spec standard loft angle (°) |
21.5 | 24.5 | 28.0 | 32.0 | 36.0 | 40.0 | 45.0 | 50.0 | 56.0 |
| Lie angle (°) | 61 | 61.5 | 62 | 62.8 | 63.5 | 64.1 | 64.1 | 64.1 | 64.1 |
| Bounce angle (degrees) | Five | 6 | 7 | 8 | 9 | Ten | 11 | 12 | 12 |
| Standard club length (inches) | 38.5 | 37.75 | 37 | 36.5 | 36 | 35.5 | 35.5 | 35.5 | 35.5 |
| grip | GP360 LITE TOUR VELVET ROUND (no backline) |
*The above lie angle is for the standard (black) model.
*When adjusting the lie angle or loft angle, wrinkles may occur in the neck.
*The total weight and balance indicated are only reference values.
● Assembled in Japan [Customization, partial repairs, etc.: Assembled in USA]
Long and middle shots have a high trajectory,
Short is control
The layering pattern varies for each club, and the long and middle irons are designed to be highly balanced, which naturally improves the swing and increases the flex and rebound of the mid-tip, improving the ball's launch.
The short irons are designed to allow you to control the ball while feeling the flex in your grip and suppressing the movement of the tip.
|
| RAUNE IRON i60 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | R/59
S/60 | R/59
S/60 | R/61
S/61 | R/62
S/63 | R/63
S/63 | R/64
S/64 | R/64
S/65 | R/65
S/65 |
| Torque (deg) | 4.5 | 4.5 | 4.4 | 4.3 | 4.1 | 4.0 | 4.0 | 3.8 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | R/14.80 S/14.85 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
| RAUNE IRON i75 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | R/71
S/72 | R/72
S/73 | R/74
S/74 | R/75
S/75 | R/75
S/76 | R/76
S/76 | R/77
S/77 | R/77
S/77 |
| Torque (deg) | 3.6 | 3.5 | 3.5 | 3.3 | 3.2 | 3.2 | 3.2 | 3.0 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | R/15.00 S/15.05 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
| RAUNE IRON i90 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | R/90
S/90 | R/90
S/90 | R/92
S/92 | R/93
S/93 | R/93
S/94 | R/94
S/94 | R/94
S/95 | R/95
S/96 |
| Torque (deg) | 3.3 | 3.3 | 3.2 | 3.1 | 3.1 | 2.8 | 2.7 | 2.6 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | R/15.20 S/15.25 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
| RAUNE IRON i105 | #3 | #Four | #Five | #6 | #7 | #8 | #9 | #Ten |
| Weight (g) | S/108
X/109 | S/108
X/109 | S/110
X/110 | S/110
X/110 | S/112
X/113 | S/112
X/113 | S/12
X/114 | S/113
X/114 |
| Torque (deg) | 3.3 | 3.2 | 3.1 | 3.1 | 2.9 | 2.9 | 2.8 | 2.7 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | S/15.25X/15.30 |
| kick point | Medium tone |
| Shaft length (mm) | 991 | 978 | 965 | 952 | 939 | 926 | 913 | 900 |
