Daiichi Golf Original Custom
[Daiichi Golf Original]
PING S159 Wedge Graphite Design RAUNE Wedge Shaft
Item Number
s159-43
-
Custom (estimated delivery time: about 1 week)
List price
¥
44,550
at the place
¥
36,300
tax included
[
330
Points awarded ]
-
-
-
-
-
-
-
-
-
-
-
-
Quantity in stock
992
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
| Sole Type | S Grind (with Midnight) | Double Grind | B Grind |
| count | 46 | 48 | 50 | 52 | 54 | 56 | 58 | 60 | 54 | 56 | 58 | 60 | 58 | 60 |
| Lie angle (degrees) | 64 | 64 | 64 | 64 | 64.3 | 64.3 | 64.5 | 64.5 | 64.3 | 64.3 | 64.5 | 64.5 | 64.5 | 64.5 |
| Bounce angle (degrees) | 12 | 12 | 12 | 12 | 12 | 12 | Ten | Ten | 14 | 14 | 14 | 14 | 8 | 8 |
| Standard club length (inch) | 35.5 | 35.5 | 35.5 | 35.5 | 35.25 | 35.25 | 35 | 35 | 35.25 | 35.25 | 35 | 35 | 35 | 35 |
| Sole Type | H Grind | T Grind | E-Grind |
| count | 54 | 56 | 58 | 60 | 58 | 60 | 62 | 54 | 56 | 58 | 60 |
| Lie angle (degrees) | 64.3 | 64.3 | 64.5 | 64.5 | 64.5 | 64.5 | 64.5 | 64.3 | 64.3 | 64.5 | 64.5 |
| Bounce angle (degrees) | Ten | Ten | 8 | 8 | 6 | 6 | 6 | Ten | Ten | 8 | 8 |
| Standard club length (inch) | 35.25 | 35.25 | 35 | 35 | 35 | 35 | 35 | 35.25 | 35.25 | 35 | 35 |
*The lie angle above is for the standard (black) model. The lie angle can be adjusted from maroon to gold.
The S Grind Midnight QPQ finish is adjustable from green to orange.
*When adjusting the lie angle or loft angle, wrinkles may occur in the neck.
*The standard grip thickness is AQUA.
● Assembled in Japan [Customization, partial repairs, etc.: Assembled in USA]
Convert the energy of a small swing into maximum spin
Designed to reduce rigidity and allow control of spin amount and launch angle (same for short irons).
The base is made thicker to maximize the amount of energy converted into spin even with a small swing.
The deep layer of the shaft is made of highly elastic material. Focusing on the structure of spin balls, which are soft on the outside and hard on the inside,
Applied to the lamination of the shaft. While strong materials are used inside, low-elasticity pitch carbon is used on the outside to reduce the overall rigidity.
|
| RAUNE WEDGE w85 | WEDGE | WEDGE+ |
| Weight (g) | 85 | 87 |
| Torque (deg) | 2.5 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | WEDGE15.40/WEDGE+15.50 |
| kick point | Medium tone |
| Shaft length (mm) | 900 |
| RAUNE WEDGE w100 | WEDGE | WEDGE+ |
| Weight (g) | 100 | 101 |
| Torque (deg) | 2.3 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | 15.50 |
| kick point | Medium tone |
| Shaft length (mm) | 900 |
| RAUNE WEDGE w115 | WEDGE | WEDGE+ |
| Weight (g) | 120 |
| Torque (deg) | 1.8 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | 15.50 |
| kick point | Medium tone |
| Shaft length (mm) | 900 |
*85/100...Flex WEDGE is equivalent to R, WEDGE+ is equivalent to S *115...Flex WEDGE is equivalent to S, WEDGE+ is equivalent to X
*What is low-elasticity pitch-based carbon? There are two types of carbon: PAN-based carbon, which is made by carbonizing fibers, and pitch-based carbon, which is made by bundling carbon made from petroleum and other materials into fibers.
Pitch-based carbon transmits vibrations more mildly than PAN-based carbon, making it ideal for creating the soft feel required for irons.
PAN-based materials are traditionally used in woods to improve flex and bounce.
