Daiichi Golf Original
[Daiichi Golf Original]
Callaway X Forged Irons True Temper Project X LZ Shaft
5I～PW(6 clubs set)
Callaway X FORGED
Item Number
24xfgir-13
-
Custom (estimated delivery time: about 1 week)
List price
¥
267,300
at the place
¥
213,840
tax included
[
1,944
Points awarded ]
-
-
-
-
-
-
-
-
-
-
Quantity in stock
999
*Sales prices at physical stores may vary depending on fitting, etc.
*We do not accept discount negotiations at physical stores when comparing online prices.
One-piece soft iron forging with a simple half cavity back The X FORGED Iron is a model for professionals and advanced players, forged from a single material (S20C) and offering a pure, comfortable feel and dry sound. The back face has a simple half cavity structure. In keeping with the tendency of elite players to hit the ball in the center of the bottom of the face, the lower back face has a triangular thick section with the center at the apex, and from there the thickness changes in stages, from a slightly thicker section to a completely cavity section. It is also noteworthy that the steps created by the change in thickness are shaped like the letter X.
Looks like it's very easy to use It looks very compact when you set up, as it's aimed at professionals and advanced players. In addition, the offset from the neck to the leading edge is small, and the top blade is thin, making it look like it will be easy to control the head. Another notable feature is that the head weight has been designed to be slightly lighter to improve operability, based on feedback from the Japanese tour.
Chamfering on the front and back of the sole for a smooth swing-through feel The most important thing about the new "X FORGED Iron" is the ease of release. The narrow sole incorporates a process called tri-level sole design, with a semicircular chamfer on the leading edge and a consistent chamfer from the toe to the heel on the trailing edge. This allows for a smooth swing-through, which greatly contributes to easier ball control.
Aimed at elite players, the loft of the I#7 is 33 degrees. The clubs are 8 in number, I#3-9 and PW, with the loft of the I#7 being 33 degrees, a traditional setting for highly skilled players. The set includes 6 clubs, I#5-9 and PW, with I#3 and I#4 sold separately. Two steel shaft models are available.
| count | #3 | #Four | #Five | #6 | #7 | #8 | #9 | P.W. |
| Head material/manufacturing method | Soft iron forging (S20C) |
| grip | Callaway Tour Velvet Rubber Black/White No backline Approx. 50g, Caliber 60 (5716030) |
| Loft angle (°) | 20 | twenty three | 26 | 29 | 33 | 37 | 41 | 46 |
| Lie angle (°) | 60 | 60.5 | 61 | 61.5 | 62 | 62.5 | 63 | 63.25 |
| Custom club length (inches) | 39.0 | 38.5 | 38.0 | 37.5 | 37.0 | 36.5 | 36.0 | 35.75 |
| PROJECT X LZ |
The new TWT (Triple Wall Technology) technology has increased the strength of the tip and butt sections, and maximized and optimized the energy conductivity in the "Loading Zone" in the middle of the shaft (compared to our previous products).
Not only has the shaft hardness been adjusted with an optimal taper rate for each flex, but the weight is also set significantly differently for each flex, ranging from 6.5/125g (approximately 118g after cutting) for tour players to 5.0/110g (approximately 102g after cutting) suitable for amateur golfers.
The external appearance is also different from previous Project X models, with a stepless shaft and a design that makes the LZ function visible at a glance.
After three wins on the PGA Tour in 2016, many tour players have switched to Project X LZ Steel.
|
| flex | Shaft length | Tip Diameter | Butt Diameter | Weight after cutting | kick point |
| 6.5 | 40.0-36.5 inches (1.015-927 mm) | .355 inch (9.00 mm) | .600 inches (15.25) | 125g | Mid-tone |
| 6.0 | 120g |
| 5.5 | 115g |
| 5.0 | 110g |
・Project X series is a product that is weight-controlled, but vibration frequency is not controlled.
Regarding weight, there is a tolerance of about plus or minus 4g around the values stated in the specifications, fitting data, etc.
-Rifling structure: The internal rifling structure absorbs shaft vibrations, reducing strain on the body.
・Stepless: A type of shaft that has no steps.
-Weight control: The weight of each shaft is controlled within the tolerance range.
・Constant weight: All clubs are designed to be the same weight. Parallel weight varies depending on settings.
