A high trajectory model with a wide sole that is resistant to mistakes and easy to hit.

It is often said that irons are for controlling distance, not for flying. However, there must be many players who benefit from being able to hit the ball farther, and if that means proper spin and height, and less variation in results, the story changes. The Ai Smart Face, developed for 2024, has made it possible to achieve a shot that meets all of these requirements. Whatever the shot or impact, the microdeflections (countless deflections) convert it into an optimal trajectory and even demonstrate resistance to mishits. The latest technology may overturn the previous concept in the future. Of the three models in the new series, the "PARADYM Ai SMOKE HL Iron", which uses a cavity back and a thick top blade and sole, is as easy to use in terms of performance as it is in appearance. In addition to distance, AI is designed with a particular focus on the ease of lifting the ball.

Features &
Benefits

250,000 swing data inputs, 50,000 tests The "PARADYM Ai SMOKE" series irons are also equipped with the latest Ai Smart Face. This time, instead of using the values ​​from the robot test, 250,000 swing data were input into the supercomputer. Under conditions such as increasing the flight distance, optimizing the spin, and suppressing the variation in the trajectory, the AI ​​used this real data to carry out 50,000 design and tests, and completed the Ai Smart Face that achieves flight and ease of use that defies common sense.

Micro-deflection corrects the trajectory to the optimum There are three models in the "PARADYM Ai SMOKE Series" irons. The "PARADYM Ai SMOKE HL Iron" is the model that pursues the most forgiveness. The head size is large, and it has a cavity back that looks gentle and a thick top blade. The sole is also wide, so it is strong against duffing mistakes.

Adopting a cavity back and thick sole that looks easy to use There are three models in the "PARADYM Ai SMOKE Series" irons. The "PARADYM Ai SMOKE HL Iron" is the model that pursues the most forgiveness. The head size is large, and it adopts a cavity back that looks easy to use and a thick top blade. The sole is also wide, and it is strong against duffing mistakes.

The loft angle is 30 degrees for I#7, which is not too strong. The "PARADYM Ai SMOKE HL Iron" is available in I#4-9, PW, AW, GW, and SW. The Ai Smart Face is installed in I#4-7, which are designed to fly well, but are also more prone to mishits, and the face plate is used in the subsequent irons. Callaway's unique urethane microspheres, which provide an excellent feel, and tungsten weights for optimal weight distribution are also installed in I#4-7. The loft angle is 30 degrees for I#7, which is not too strong. The shaft is available in two steel types and one carbon type.



AI SMART FACE

Data on the head behavior before impact of over 250,000 real golfers has been compiled.
The Ai Smart Face, which has had its AI trained on a vast amount of swing data, generates countless small deflections during impact and automatically corrects launch angle and spin rate. The entire face acts as a sweet spot, reducing losses due to differences in swing trajectory and impact point, resulting in reliable flight.

count	#Four	#Five	#6	#7	#8	#9	P.W.	A.W.	Golden Week	SW
Face Material/Construction	17-4 Stainless Steel / Ai Smart Face / Face Cup				17-4 Stainless Steel / Faceplate
Body Material	17-4 Stainless Steel + Urethane Microspheres + MIM Tungsten Weight				17-4 Stainless Steel
Club Length (inches)	39.75	39.0	38.25	37.5	36.75	36.0	35.75	35.5	35.5	35.5
Loft angle (°)	21.0	24.0	27.0	30.0	34.0	38.0	43.0	47.0	51.0	55.0
Lie angle (°)	59.75	60.5	61.25	62.0	62.75	63.5	63.75	64.0	64.0	64.0
Standard Grip	LAMIKIN ST +2 HYBRID CALIBRATE with back line shaft: approx. 45g, caliber 60 (5720314)

The new DG series (DG95/DG105/DG120) was developed over a period of more than three years. By adopting new materials, heat treatment, Variable Wall Technology (VWT), an original shaft that varies the thickness in multiple places, and a new step pattern, the new DG series offers the same feeling as the previous Dynamic Gold model while achieving even greater performance. In particular, the DG95 model, which was released first in Japan, is lightweight at around 90g, but by having a similar stiffness curve to the conventional DG model, it achieves the same stickiness and controllability as the DG, despite being a lightweight shaft. The greatest advantages of lightweight shafts -- ease of swing and distance -- have been further improved, and by setting the kick point at a mid-kick point for the DG95 and at a kick-kick point for the DG105/120, we have achieved a balance with controllability.

*Do not wipe the printed surface with solvents such as thinner, as this may cause the printing to peel off.
Please note that the print may peel off depending on the length of use and the conditions of use.

Dynamic Gold 95

Application	Tip	flex	Shaft length	Tip Diameter	Butt Diameter	Weight before cutting	Weight after cutting	Kick Point
iron	taper	S200	38.5-35.0 (978-889)	.355 inch (9.00mm)	.600 inch (15.25mm)	95g	—	Mid-tone
iron	taper	R300	38.5-35.0 (978-889)	.355 inch (9.00mm)	.600 inch (15.25mm)	95g	—	Mid-tone

Dynamic Gold 105

Application	Tip	flex	Shaft length	Tip Diameter	Butt Diameter	Weight before cutting	Weight after cutting	Kick Point
iron	taper	X100	41.0-37.0 (1,041 -940)	.355 inch (9.00mm)	.605 inch (15.37mm)	105g	—	Original condition
iron	taper	S200	41.0-37.0 (1,041 -940)	.355 inch (9.00mm)	.600 inch (15.25mm)	103g	—	Original condition
iron	taper	R300	41.0-37.0 (1,041 -940)	.355 inch (9.00mm)	.600 inch (15.25mm)	101g	—	Original condition