Features &
Benefits

250,000 swing data inputs, 50,000 tests The "PARADYM Ai SMOKE" series irons are also equipped with the latest Ai Smart Face. This time, instead of using the values ​​from the robot test, the supercomputer was input with 250,000 swing data. Under conditions such as increasing the flight distance, optimizing the spin, and suppressing the variation in the trajectory, the AI ​​used this real data to carry out 50,000 designs and tests, and completed the Ai Smart Face that achieves flight and ease of use that defies common sense.

Microdeflection corrects the trajectory for optimal results
The AI ​​Smart Face creates optimal micro-deflections (countless deflections) on every part of the face, correcting the ball speed, spin, direction, and launch angle for any hitting style or head position. As a result, the ball flies farther than ever before and stops in a very narrow range.

Sharp shape like a muscle back, yet extremely forgiving There are three models in the "PARADYM Ai SMOKE Series" irons. The "PARADYM Ai SMOKE Iron" is the standard model. It has a sharp looking head like a muscle back, but the structure is hollow, and with the effect of the Ai Smart Face, it is extremely forgiving.

All clubs feature urethane microspheres for a comfortable feel. The PARADYM Ai SMOKE irons are available in I#4-9, PW, AW, GW, and SW. The Ai Smart Face is installed in I#4-8, which are designed to deliver good distance but are also more prone to mishits, and the rest of the clubs feature face plates. All clubs feature Callaway's unique urethane microspheres, which provide an excellent feel. I#4-7 also feature tungsten weights. The loft angle is set at 28 degrees for I#7. The shafts are available in two steel types and one carbon type.



AI SMART FACE

Data on the head behavior before impact of over 250,000 real golfers has been compiled.
The Ai Smart Face, which has had its AI trained on a vast amount of swing data, generates countless small deflections during impact and automatically corrects launch angle and spin rate. The entire face acts as a sweet spot, reducing losses due to differences in swing trajectory and impact point, resulting in reliable flight.

count	#Four	#Five	#6	#7	#8	#9	P.W.	A.W.	Golden Week	SW
Face Material/Construction	17-4 Stainless Steel / Ai Smart Face / Face Cup					17-4 Stainless Steel / Faceplate
Body Material	17-4 Stainless Steel + Urethane Microspheres + MIM Tungsten Weight				17-4 Stainless steel + urethane microspheres
Club Length (inches)	39.125	38.5	37.875	37.25	36.625	36.0	35.75	35.5	35.5	35.5
Loft angle (°)	19.0	22.0	25.0	28.0	32.0	37.0	42.0	46.0	50.0	54.0
Lie angle (°)	60.375	61.0	61.625	62.25	62.875	63.5	63.75	64.0	64.0	64.0
Standard Grip	LAMIKIN ST +2 HYBRID CALIBRATE with back line shaft: approx. 45g, caliber 60 (5720314)

PROJECT X LZ

The new TWT (Triple Wall Technology) technology has increased the strength of the tip and butt sections, and maximized and optimized the energy conductivity in the "Loading Zone" in the middle of the shaft (compared to our previous products). Not only has the shaft hardness been adjusted with an optimal taper rate for each flex, but the weight is also set significantly differently for each flex, ranging from 6.5/125g (approximately 118g after cutting) for tour players to 5.0/110g (approximately 102g after cutting) suitable for amateur golfers. The external appearance is also different from previous Project X models, with a stepless shaft and a design that makes the LZ function visible at a glance. After three wins on the PGA Tour in 2016, many tour players have switched to Project X LZ Steel.

flex	Shaft length	Tip Diameter	Butt Diameter	Weight after cutting	kick point
6.5	40.0-36.5 inches (1.015-927 mm)	.355 inch (9.00 mm)	.600 inches (15.25)	125g	Mid-tone
6.0				120g
5.5				115g
5.0				110g

・Project X series is a product that is weight-controlled, but vibration frequency is not controlled.
Regarding weight, there is a tolerance of about plus or minus 4g around the values ​​stated in the specifications, fitting data, etc.

-Rifling structure: The internal rifling structure absorbs shaft vibrations, reducing strain on the body.

・Stepless: A type of shaft that has no steps.

-Weight control: The weight of each shaft is controlled within the tolerance range.

・Constant weight: All clubs are designed to be the same weight. Parallel weight varies depending on settings.