This product is a Daiichi Golf original custom product.
Usually the delivery time is about 10 days .
Please note that delivery may be delayed if the manufacturer is out of parts.

*Please note that orders cannot be canceled after they have been placed.

*We will inform you of the delivery date as soon as we receive it from the manufacturer. Thank you for your understanding.

*If you request a lie angle adjustment, dents or scratches may occur during the adjustment.
Please be aware of this. (We will make the necessary arrangements.)

*The length may change depending on the balance of the finished product. Please note this in advance.

*If the item is sold out, the product manager will contact you again by email.

Manufacturer's suggested retail price is listed based on the manufacturer's catalog.

No plating on the face
[Daiichi Golf Original]
Callaway Jaws Forged Wedges
NSPRO MODUS3 wedge shaft
JAWS FORGED

Item Number 23jawsfg-19

List price ¥ 38,500 at the place

¥ 28,600 tax included

[ 260 Points awarded ]

Head type (required)
Loft angle (°)/bounce (°) (required)
Shaft flex (required)
Lie angle change (required)
Grip (required)
Grip lower roll (required)

Quantity in stock 980

I write a review

Bank transfer | Cash on delivery | Convenience store

*Sales prices at physical stores may vary depending on fitting, etc.

*We do not accept discount negotiations at physical stores when comparing online prices.

Features &
Benefits

A form born from tour feedback The biggest difference between the new JAWS FORGED wedge and its predecessor is its shape. The leading edge has been changed from a straight one to a slightly rounded one that makes it easier to pick up the ball. In addition, the heel side is now higher, giving it a more bosom feel, and the shaft, hosel and face are treated to create a sense of unity. The overall shape is reminiscent of the 2007 X FORGED wedge, which was popular on the tour. Another noteworthy point is that the club balance has been lightened by reducing the head weight, improving maneuverability.

Microfeatures are also installed between the grooves for the first time. The JAWS FORGED wedge is the first soft iron forged wedge to be equipped with microfeatures. These form small convex parts between the grooves and are arranged diagonally to the grooves. The sharp corners of the 37V grooves and the non-plated face finish that accentuates the grooves create strong spin, especially on approaches where the face is open. The microfeatures and 37V grooves are used in the 54-60 degree loft models, while the 46-52 degree models have 20V grooves.

Tungsten technology for lob shots exactly how you want it The 54-60 degree loft models feature tungsten technology, which was first used in JAWS RAW wedges. The 54 and 56 degree loft models have tungsten in the first weight port on the toe side of the back face, while the 58 and 60 degree loft models have tungsten in the two weight ports on the toe side. This allows the center of gravity to be located in the center of the face in the toe-heel direction, reducing head wobble, especially when hitting shots with the face open. This allows you to hit lob shots just how you want them.

Z Grind adopted following JAWS RAW wedge The Z Grind, also first used in JAWS RAW wedges, has been introduced to the 56-60 degree loft model. The wide sole has a C grind applied to it, with slight chamfering on both the trailing edge and the leading edge. This sole inherits the C grind's ability to adapt to various lies, while also being gentle, not easily digging into the grass, and easily sliding through the grass.

There are two types of finishes, both with non-plated faces. The loft lineup of the "JAWS FORGED Wedge" is 8 types in total, ranging from 46 degrees to 60 degrees, in 2 degree increments. The 46 to 52 degree lofts use a C grind. The head finish is available in two types, chrome plating and charcoal black, and as mentioned above, the face surface of both is non-plated.

Head material	Mild steel forging
Head Finishing	Chrome (face: unplated)
Loft angle (°)	46C	48C	50C	52C	54Z	56Z	58Z	60Z
Bounce angle (°)	Ten	Ten	Ten	Ten	12	12	9	9
Lie angle (°)	64.0
Club Length (inches)	35.75		35.5		35.25		35.0
grip	Callaway Tour Velvet Rubber Black/White No Backline: Approx. 50g, Caliber 60 (5716030)

*Assembled in China/Japan
*C: C grind sole / Z: Z grind sole

●GRIP
Callaway Tour Velvet Rubber Black/White No Backline Shaft installed: Approx. 50g, Caliber 60 (5716030)

Based on the classic NSPRO WV, a shaft designed specifically for wedges that thoroughly pursues "operability," approach performance has been further improved by incorporating feedback from PGA Tour players.
Nippon Shaft's unique thickness adjustment technology, "MHT technology," provides the optimal feeling required for approach gear.

●NSPRO MOUDUS3 WEDGE Steel shaft for wedges

●Improved operability with flexible feeling control.
"MHT technology" allows you to freely control the feeling of every part of the shaft. We pursue the ideal feeling of the shaft required for approach shots and improve maneuverability.

●High level of stability for solid pins.
It features a low launch angle, consistent spin, and excellent directional stability.
This allows players to maximize their skills and attack the pin with confidence and the desired trajectory.

●Best match with irons.
Available in three weight ranges. All of them feature a natural flex and can be set up with any type of iron shaft.

product name	flex	Weight (g)	Balance Point	torque	kick point
NSPRO MODUS3 WEDGE105	Wedge	111	51.7	1.6	During ~
NSPRO MODUS3 WEDGE115		122	52.3	1.5	During ~
NSPRO MODUS3 WEDGE125		133	51.8	1.3	During ~