Grand Canyon Sole (Grand Canyon)
Amateurs make two main types of mistakes: topping the ball and duffing it. The DJ-6 features the newly developed G Canyon sole, which is more resistant to duffing mistakes.
The combination of height differences between the bumper sole and the canyon vance was tested repeatedly to find the optimum design, and the two sole surfaces work in synergy to create a well-balanced effect.
The bumper sole allows the head to dig into the ground, while the canyon bounce firmly grips the ground, pushing the ball forward without letting it sink too deep. This gives you the ease of hitting with a fully automatic feel that is entirely up to the club.

Optimal weight distribution design The combination of the "W reverse taper blade" and "theater blade structure" optimizes the weight distribution of the head.
Weight is placed on the top toe side of the blade and at the rear of the sole to further increase stability at impact.

Theater Blade Structure By eliminating the step in the cavity and flowing the face thickness into a theater-like shape, the vibration transmitted to the hand and the center of gravity are controlled. This achieves both the "feel" and "ease of use" that golfers desire from soft iron forging.

Head material: This is a forged head that uses S20C (mild steel), which is the softest of all head materials.
It gives golfers a feeling of the ball sticking to the club at impact.

Precision Forging The back face is precisely forged, the base is neatly prepared, and then it is finished with fine shots to make it scratch-resistant and maintain its beauty.

New High Spin Mirror Forged Face The new high spin mirror forged face is a further evolution of the manufacturing method of the conventional high spin mirror forged face, which delivers stable spin performance even in the rough, and pursues a groove shape that is right at the edge of what is permitted by the rules.
It prevents the decline in spin performance even on rough surfaces or rainy days, providing stable spin performance.

head	S20C mild steel forging (ultra-high precision, mirror forged score line face)
finishing	Nickel chrome plating, pearl satin finish
Loft angle (°)	44	46	48	50	52	54	56	58	60
Lie angle (°)	63.0°	63.0°	63.0°	63.5°	63.5°	64.0°	64.0°	64.0°	64.0°
Feeling angle (°)	13	13	13	17	17	18	18	18	18
Length (inches)	35.5			35.25		35.0
grip	Genuine grip (black)

*The perceived bounce angle is a reference value when the bounce effect of the G Canyon sole is converted to a standard sole shape.
In addition, the above specifications are design values.

Wedge-only version. In addition to the same tour-spec label design as the pros, the black powder coat paint improves durability. It helps reduce the glare reflected off the shaft when you take your stance, which helps you maintain concentration until the end of your swing. It exudes a cooler sense of luxury and a more rugged look, and its synergistic effect with the same performance as Dynamic Gold makes it an "aggressive steel shaft designed specifically for wedges" suitable for many aggressive golfers.

*This product has a black coating/clear paint on the entire shaft, and the label is silk-screened. The clear coating is applied to protect the printed surface, but please note that the printing may peel off over many years of use or depending on the conditions of use.
In addition, do not wipe the printed surface with thinner or other solvents as this may cause the printing to peel off.

The Dynamic Gold Tour Issue Onyx Black is a shaft designed specifically for wedges.

Dynamic Gold Tour Issue Onyx PCB

Application	Tip	flex	Shaft length	Tip Diameter	Butt Diameter	Weight before cutting	Weight after cutting	Kick Point
For wedges only	taper	X100	37.0 inches (940 mm)	.355 inch (9.00mm)	.600 inch (15.25mm)	130g	119g	Original condition
For wedges only	taper	S200	37.0 inches (940 mm)	.355 inch (9.00mm)	.600 inch (15.25mm)	129g	118g	Original condition