This product is a made-to-order product.
The normal delivery time is approximately 3 weeks.
If the manufacturer is out of stock of parts, there may be significant delays.
Please note.
Please understand that if the item is sold out, we apologize for the inconvenience.
-For those who wish to adjust the loft and lie angle-
Please note that scratches and dents may occur when adjusting the loft and lie angles.
*Please note that orders cannot be canceled after they have been placed.
Manufacturer's suggested retail price is listed based on the manufacturer's catalog.
Aren't professional model wedges difficult?
There are wedges for amateurs!
A new category of wedge, the RM-α, designed for players aiming for a single handicap. To achieve a single HDCP, you don't need a super approach to get a high score like in a professional match, but for amateurs to put together a score, you need to be able to pick up par with a high probability in simple lies and situations. Professional models that allow you to use your techniques are like racing cars, and you can get great shots, but they are less forgiving of mistakes and are too difficult for amateurs. This RM-α is like a semi-automatic paddle shifter in a car, and the sole design is forgiving of mistakes even in approaches using techniques, increasing the probability of aiming for par from various lies. Just as professional models are made to bring out the skills of professionals, there are wedges that suit the skills of amateurs, and we would like ambitious players who are aiming for a single handicap to use them.
This is the new category, RM-α.
| Loft angle (°) | 46 | 48 | 50 | 52 | 54 | 56 | 58L | 58M | 58H | 60 |
| Lie angle (°) | 63 | 63 | 63.5 | 63.5 | 63.5 | 64 | 64 | 64 | 64 | 64 |
| Vance (°) | 7.5 | 7.5 | 8 | 8 | 11 | 12 | 8 | 11 | 14 | Ten |
| Club Length (inches) | 35.5 | 35.5 | 35.25 | 35.25 | 35.25 | 35 | 35 | 35 | 35 | 35 |
■Head: Forged soft iron (S20C) (New high-spin mirror forged face, D-step blade design)
■ Finish: Nickel chrome plating, gun black finish
Convert the energy of a small swing into maximum spin
Designed to reduce rigidity and allow control of spin amount and launch angle (same for short irons).
The base is made thicker to maximize the amount of energy converted into spin even with a small swing.
The deep layer of the shaft is made of highly elastic material. Focusing on the structure of spin balls, which are soft on the outside and hard on the inside,
Applied to the lamination of the shaft. While strong materials are used inside, low-elasticity pitch carbon is used on the outside to reduce the overall rigidity.
|
| RAUNE WEDGE w85 | WEDGE | WEDGE+ |
| Weight (g) | 85 | 87 |
| Torque (deg) | 2.5 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | WEDGE15.40/WEDGE+15.50 |
| kick point | Medium tone |
| Shaft length (mm) | 900 |
| RAUNE WEDGE w100 | WEDGE | WEDGE+ |
| Weight (g) | 100 | 101 |
| Torque (deg) | 2.3 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | 15.50 |
| kick point | Medium tone |
| Shaft length (mm) | 900 |
| RAUNE WEDGE w115 | WEDGE | WEDGE+ |
| Weight (g) | 120 |
| Torque (deg) | 1.8 |
| Tip Shape | Tapered type Tip diameter 9.1mm/Taper length 35mm |
| Butt diameter (mm) | 15.50 |
| kick point | Medium tone |
| Shaft length (mm) | 900 |
*85/100...Flex WEDGE is equivalent to R, WEDGE+ is equivalent to S *115...Flex WEDGE is equivalent to S, WEDGE+ is equivalent to X
*What is low-elasticity pitch-based carbon? There are two types of carbon: PAN-based carbon, which is made by carbonizing fibers, and pitch-based carbon, which is made by bundling carbon made from petroleum and other materials into fibers.
Pitch-based carbon transmits vibrations more mildly than PAN-based carbon, making it ideal for creating the soft feel required for irons.
PAN-based materials are traditionally used in woods to improve flex and bounce.
